Carburetor upgrad on a B21A

[BIOHAZZARD]

what can i do? i want more power and i see this as a good way to go, iv seen pics of this done, but i never seen eneywhere that tells me what i can bolt up, or what i have to chage to make her a dule?

[malloy1]

More work on a carb car than one that already has fuel injection, but parts are all out there for a 240.

I use to run a B21A carb setup in my '65 122 that I installed a B21F engine in, but upgraded to megasquirt. I really noticed the difference!

I had to get some parts fabricated because 122s never had fuel injection (i.e. gas tank, fuel lines, fuel pump, intake, throttle setup etc.). Your upgrade would be a lot easier than my upgrade. If you find a whole 240 fuel injected car (I would look for a 85 or newer), you could just swap out to LH. I paid $300 for a '90 240.

Paul


Currently running:

-'65 Volvo 122 with a B21F/M41 (stocked, not modified normally aspirated engine 4-cyl 2100cc])
-LC-1 WBO2
-MS V2.2 running MSnS-extra (29v) (running electric fan control)- tuning with MT2.25
-Bosch 004 Dizzy/Bosch 139 mod
-Bosch 21lbs EFI injectors
-Volvo 850 Bosch TPS
-Closed idle control with Bosch 516 motor