Body help

[BDKR]

I'm trying to kill about 3 birds with one stone this weekend on the car. Right before I put Sylvanna on blocks, I kissed the back of a truck with the right front headlight. Did very little damage, but enough that the work to fix it is extensive.

What I need to replace is the crossmember that locates the headlights and hood latch (I got lucky that I don't need more). It's mostly undone, but there is something holding it in still. Something that I can't find. Anybody else with a 240 have to deal with this stuff?

Any help is a blessing! I need to get this stuff out so I can remove the engine and mate it to the 372 as well as some extensive cleanup in the engine bay area.

Thanx

[Captain Bondo]

Did you drill out all of the spot welds?

Typically there are 2 or 3 on each side attaching it to the sheetmetal that the headlights bolt to, and 1 or 2 holding it to each fender down at the bottom.

[BDKR]

Did you drill out all of the spot welds?

Typically there are 2 or 3 on each side attaching it to the sheetmetal that the headlights bolt to, and 1 or 2 holding it to each fender down at the bottom.

Ahhh! Righteous broo! I'll check that out when I get back home and get back to work on the car.

Thanx mate!