MS on 86+ 2.3 turbo

[TurboTim]

I am wondering about putting MS on my current ride but was wondering how many ignition drivers there is since this is coil on plug. Anyone else done this yet? What is the crank/cam setup on these anyways? How many teeth.

[The Aspirator]

What car and what year engine? If it's got LH2.4 computers stock then you can use the flywheel 60-2 VR sensor to trigger crank angle, and you can easily modify a block mounted distributor to show cam position. Presto chango, sequential coil on plug. Or you could simply do wasted spark coil on plug without using the dizzy. MS 2.2 only comes stock with 1 ignition output (not a driver), but it can have up to 6 individual spark outputs, although you have to do all the wiring/circuitry/soldering yourself (unless someone out there does custom setups, possible). On my MS I've got it wired for 4cyl sequential, hopefully I'll have it running tomorrow.

MS 3.0 I *think* comes with a few ignition drivers built in, and has plenty of room to add more.

Here's a great thread to read through:
http://forums.turbobricks.com/showthread.php?t=110786
This one too:
http://forums.turbobricks.com/showthread.php?t=95888

Sounds like you have some wicked cars there!