AZ Meet, Sat, Oct 11th

[thelostartof]

Ok so this really needs to get done, AZ meet, it has been a good long time and nothing big has gone down.

This sat I am going to (read NEED TO) build a new header for the 944 as the stock one is leaking so plan for a full day of cutting and welding and fab work along with just hanging out.

This will be at my new place, those who need directions PM me, otherwise be there.


If I can find a way I will get a BBQ there for food, otherwise expect pizza of somekind

[Krisverde]

Well I shouldn't have an excuse NOT to make it as you are less the 2 miles away from me. You know anything about doing toe adjustments for an alignment?

I will see how busy I am on saturday though.

[Lucky the Smiling Pirate]

If I show up to this, i run the risk of failing school. If i didn't run the risk of failing school, I'd be in my garage, bolting to gether the intake, throttle linkage, and fuel rail of my motor assuming I can find all the parts needed for the job in the garage:-P

have fun!

[tryingbe]

You know anything about doing toe adjustments for an alignment?

Adjusting is easy, the problem is that knowing how much to adjust to hard. String and rope between two wheel isn't the easiest thing to do.

Paying somebody $60-70 is worth it, sometimes.

[CAPT_BLOTTO]

oo i work 4-11 so ill try to hang out it in the morning.

[thelostartof]

Adjusting is easy, the problem is that knowing how much to adjust to hard. String and rope between two wheel isn't the easiest thing to do.

Paying somebody $60-70 is worth it, sometimes.

+9 ... very much worth the $ to be done right

I still need to replace the 8k old tie rods on my car(cheapo's) that failed and get new ones on and get it aligned right

oo i work 4-11 so ill try to hang out it in the morning.


Good, your parts should all be here by then also

[fige]

I'd like to attend another meet someday. A big one, like we used to have like 2 years ago. It just sucks that I work on saturdays now.... so It would have to be sundays.... Ill come up someday anyway to pay a visit to you and jesse... and I haven't met rover yet.

[thelostartof]

Whenever you want to come up and crash you are free to as there is a spot for ya to sleep

[maxman142001]

im there...ill bring my Kenny header for everyone to oggle over :)

plus need to get my door handles fixed, and give Jesse back stuff

[Krisverde]

Does it matter what time we show up?

[thelostartof]

early works best, I will post when I am up, prob around 7-8am

[Krisverde]

Awesome I may just ride my bike there :)

[Lucky the Smiling Pirate]

leland, grab my strut brace for me please:)

[maxman142001]

ok, will do

[maxman142001]

mind if i do some test fit shots of the Kenny Header with turbo on the 940 when you have the exhaust off?

btw i might be rolling on some new wheels by the weekend....we'll see :)

[rancidponymilk]

I'll be there.

[maxman142001]

chris,
do you have any volvo spacers for going from RWD to FWD?

[thelostartof]

I do on the 944 haha

and new header is in engine bay ... going to maybe start cutting stuff up tonight

[tryingbe]

I'll be there in the morning... how early can I be there?

[fige]

lets turbo my amazon. LAWL

[maxman142001]

I do on the 944 haha

and new header is in engine bay ... going to maybe start cutting stuff up tonight

damn!

btw is there any cars that will be headerless for me to test fit my kenny header, with turbo?

[thelostartof]

the 944 will be header less as it will be going on and off and on and off cutting and test fitting so

[thelostartof]

I'll be there in the morning... how early can I be there?

8ish I think should be good, I might be up by 7, depends on what is going on on friday night

[maxman142001]

the 944 will be header less as it will be going on and off and on and off cutting and test fitting so

perfect!

[Mortar]

Mike, I have a funky old Propane grill you can have. Needs a new style tank though.

Theres a new guy in town that I sold a sway bar to. I'll see if he wants come. He's got some rear springs & shocks to do on his 240.

Geoff

[maxman142001]

Sat. should be a good turnout, finally a MEET!

[thelostartof]

Mike, I have a funky old Propane grill you can have. Needs a new style tank though.

Theres a new guy in town that I sold a sway bar to. I'll see if he wants come. He's got some rear springs & shocks to do on his 240.

Geoff

that would be sweeeet I can send someone out to go dig up a tank for it

[fige]

Sat. should be a good turnout, finally a MEET!

:-(

[Lucky the Smiling Pirate]

felix, I'll make a deal with you. if you scrounge the cash to come to this meet (and bring me an lh2.2 distributor:-P) I'll risk failing out of lawschool and show up too:-D

[fige]

felix, I'll make a deal with you. if you scrounge the cash to come to this meet (and bring me an lh2.2 distributor:-P) I'll risk failing out of lawschool and show up too:-D

I work on saturdays! It facking sucks

[Lucky the Smiling Pirate]

phale:-(

[thelostartof]

felix, I'll make a deal with you. if you scrounge the cash to come to this meet (and bring me an lh2.2 distributor:-P) I'll risk failing out of lawschool and show up too:-D



I have a LH 2.2 Head mount dizzy around here someplace

[maxman142001]

I have a LH 2.2 block mount....what are you looking for?

[maxman142001]

phale:-(

come out anyways

[Lucky the Smiling Pirate]

going sequential fire cop I'd want a cam trigger. apparently the 2.2 distributors are the most readily modded for this purpose:e-shrug:

[non-locality]

Can I join? I was planning on working on my 240 on sat. I have a bunch of things I wanted to work on. I have a couple of instrument clusters for the 2-- models. One is cable driven speedo and the other is electric. I can bring them if anybody needs spare parts. I have jack stands, ramps and a bunch of tools that I'll be bringing....

[non-locality]

Oh yeah. I made a MAF signal modifier for my car that I showed Geoff and he mentioned that some of you guys might be interested. It allows you to control your A/F ratio by turning a knob and I guess it would be very useful if you are running E85 but I made it just to get better fuel efficiency. Right now I can only lean out the mix but I can make one that would allow you to make it richer if you want more power at the cost of gas mileage.

[maxman142001]

Sounds very cool! Yeah stop by and meet the locals, newbies are always welcome :)

[Mortar]

that would be sweeeet I can send someone out to go dig up a tank for it
Cool I'll go check it out I have messed with it for a while you may be able to gut it and go coal. But I'll bring it all over and you make the call.

BTW, anyone going have CFI's they wanna trade for Browntops or other stuff?

[rancidponymilk]

I work on saturdays! It facking sucks

call in sick

[fige]

call in sick

impossible. There are no replacements. :rofl:

[thelostartof]

impossible. There are no replacements. :rofl:

Sounds like a good reason to ditch work, come hang out, and when you get back make them pay you more to keep you because they need you

[Krisverde]

I may show up tomorrow for a little bit, I am going to be helping my grandpa get his old ford running again.

[maxman142001]

wow 46 miles away from my new house! i should be there around 10-11 hopefully :)

mike, ill also be bringing you your 740 dp i promised

[Lucky the Smiling Pirate]

yeh, it's 48 for me. mike needs to move closer into the city.

[thelostartof]

I will move to the North Mesa area as soon as I can afford one of those HUGE plots of land

[Lucky the Smiling Pirate]

im not sure whether you're being sarcastic or not. you could move into my neighborhood the way things are going for oh...180k or less more than likely. 1500sqft house on 7500sqft lot.

[thelostartof]

I am being for reals, and I like north mesa area better than phx by a long shot. I want lots and lots of land


Oh and I am up, not 100% awake but I am up so I guess ya'll can show up after 7:30 or so

[tryingbe]

8:30 am for me.

15G and 2 inch 180 bend pipe... anything else?

[thelostartof]

sounds good to me

oh and someone make gmail work for me so I can send out the invitation to another local volvo guy

[CAPT_BLOTTO]

I just woke up.

[maxman142001]

perfect day out! im leaving shortly

[Lucky the Smiling Pirate]

yes, an amazing day. I'm leaving in 5min. see y'all soon.