Volvo244GLE
10-18-2009, 10:46 PM
im after an msq file from someones setup similar to mine, im creating my own to help with the learning proccess but helps to have a backup plan - just started down the MS rout. unit is assembled and tested with a stimulator, wiring harness is started (based of LH2.2 harness).
the setup:
B23, ported and polished head with 37.5mm exhaust valves. NA at present, turbo in the pipelines. running MSII extra, v3 board thats setup for a PMW idle valve and directly control coil (using stock distibutor to maintain a more stock look), hall sensor as RPM pickup.
msq file doesnt have to be for exactly the same setup because obviously i can change some of the settings but the closer the better.
if you can help me out let me know and ill PM you my email address to send it to, thanks.
the setup:
B23, ported and polished head with 37.5mm exhaust valves. NA at present, turbo in the pipelines. running MSII extra, v3 board thats setup for a PMW idle valve and directly control coil (using stock distibutor to maintain a more stock look), hall sensor as RPM pickup.
msq file doesnt have to be for exactly the same setup because obviously i can change some of the settings but the closer the better.
if you can help me out let me know and ill PM you my email address to send it to, thanks.