PNW Dyno day - MARCH 27th!!

[klr142]

I would like to arrange a dyno day at www.englishracing.net. They have a 4 wheel dyno with adjustable wheelbase, cost is $60 for three pulls, INCLUDING wideband and boost monitoring! If we get more than 20 confirmed cars we can get that entry price down to $50.

Great deal!

Let's do a Volvo day on Saturday, MARCH 27th!

(Our friends can come too, but if we don't have enough time for the other makes... Then they'll just have to sit back and watch...)

Who: Volvos! (and other cars, if friends of a Volvo owner...)
What: Dyno your car and see how much power you got!
When: March 27th, 2010 at 10AM(possible drag racing afterwards at PIR?! with late night SHARIS afterwards!?)
Where: http://englishracing.net/
English Racing's dyno facility
3315 NE 112th Ave
Vancouver, WA 98682
Why: Great time to get together during the 'off season'

Cost will be $60 for three pulls, and that includes monitoring boost levels as well as Air/Fuel ratios! If we get over 20 confirmed cars, the cost will be $50 per person!

Regarding tuning in between runs:
We can do limited tuning but that would be extra time so those guys would probably need to go through last maybe? Depending on how many extra pulls they need they will also need to pay a bit extra.

aaron



Who's in?
1. Me
2. Nick/6kYellowLine
3. Logan/Neptune
4. Kevin/Slobodan
5. Don/abdlock
6. Davin
7. Nick/Nchoy
8. Greg/kammer
9. Eric/Poik
10. Keith Martin
11. Kirk Nelson
12. Peter/daytonat100
13. Jay/srpntn
14. Andy/swedishK
15. Ross/byte1032
16. Tom/Tfest
17. Dave's friend with a GTi
18.
19.
20.

Maybies:
21. Greg/shift_slide
22. Kevin/Scott/77volvo245
23. Cameron/volvorelix
24. Rye/RZT5
25. Danny/dmelviØØ7
26. Jered/Jerd
27. Nolan/fivedoorfury
28. Galen/old school
29. Richard/Volvogeek
30. Collan/DurableSwedish
31. Ben/WeezilUSA
32. Simon/sbabbs
33. Matt/Mad Matt
34.
35.
36.
38.
39.
40.

Dyno is an adjustable wheelbase 4 wheel dyno, so even our AWD friends can come!

Let's get this year started with a bang! Maybe we can do a dyno day in the fall/winter to see how much HP everyone's gained from their summer tinkering...

Here's a flyer from their dyno day they have going on this month, February 20th.

http://i275.photobucket.com/albums/jj311/LucasEnglish/Feb%2020th%202010%20Dyno%20Day/DynoDayFeb20th.jpg

Sounds damn good to me! I am going to go on the 20th for a baseline of some sort, anyone want to join me?

Let's do this!
-Kyle

[Tfest]

cool people there, ive been there for some of the dyno days that Corksport put on.

think my car would do well with a slipping clutch, :-P

[klr142]

If we do it sometime in March that gives you a month to replace the clutch... :) It'd do better if you do that. Or you could turn the boost down... Probably wouldn't be as fun though.

[Tfest]

that takes money and im spending all mine on other things right now. ill just dyno it and fry whats left of the clutch. :P

[neptune]

For $50 I'll commit to bring one of my 200s, probably the 242.
I can't make it the 20th, but I'm fairly open in March/April.

[Quin]

cool people there, ive been there for some of the dyno days that Corksport put on.

think my car would do well with a slipping clutch, :-P

slipping clutch or no, it'll be a far cry from that 76whp or whatever you ran at forged.

[Tfest]

slipping clutch or no, it'll be a far cry from that 76whp or whatever you ran at forged.

we'll see. it doesnt always burn out in 2nd so im worried i might get 50rwhp now... :rofl:

even if i were to buy the clutch now it probably wouldnt be here in time.

[Slobodan]

I'm bringing the Turbo DIESEL wagon. With T3/T4 turbo on it or not.

[WeezilUSA]

If its March or April, I will try to make it.

[swedishK]

i might have to find the cash to do this.

[fivedoorfury]

Me and my 245 will be there.

[Shawn!]

hmmm award for lowest HP my wifes wagon could win that i think. I am tentative though is all depends on a date, so don't count me in, but count me pretty interested.

[Ferris Bueller]

Another "depending on date" here. I'm hoping to have a different car to test out by then. Would love to see what my R would pull, though...

[klr142]

March 27th it is!

[klr142]

From my post on OVT... It's official, let's go!
Who: Volvos! (and other cars, if friends of a Volvo owner...)
What: Dyno your car and see how much power you got!
When: March 27th, 2010 at 10AM
Where: http://englishracing.net/
English Racing's dyno facility
3315 NE 112th Ave
Vancouver, WA 98682
Why: Great time to get together during the 'off season'

Cost will be $60 for three pulls, and that includes monitoring boost levels as well as Air/Fuel ratios! If we get over 20 confirmed cars, the cost will be $50 per person!

Dyno is an adjustable wheelbase 4 wheel dyno, so even our AWD friends can come!

Here's a flyer from the event that they are doing THIS weekend, that I will ALSO be going to...

Let's get this year started with a bang! Maybe we can do a dyno day in the fall/winter to see how much HP everyone's gained from their summer tinkering...

[Slobodan]

The Official Volvo Dyno Day in the Portland Area is going to be on the 27th of March now? So why bother with this other 20th Feb DDay right?

[77volvo245]

I might bring my TurboDiesel 760 if i get it intercooled by then.

[klr142]

The Official Volvo Dyno Day in the Portland Area is going to be on the 27th of March now? So why bother with this other 20th Feb DDay right?It's a baseline for comparison for me with whatever I end up running on the 27th. And will give my current tuner some feedback.

[klr142]

UPDATE!

Regarding tuning in between runs:
We can do limited tuning but that would be extra time so those guys would probably need to go through last maybe? Depending on how many extra pulls they need they will also need to pay a bit extra.

aaron

Let's get a list going, who's in?
1. Me
2.

[DurableSwedish]

sounds like fun! I'll probably bring the lexus or my wife's car. I'm not sure if I have an extra $100 for screwing around though to do both of them. wife is working, so probably my lexus if I can get the starter changed out. Will be interesting to see what it puts down. I'm guessing ~175-180 @wheels. Stock is 230hp. I'll actually be in town so it sounds like I can go pending not being broke!

[F13ND]

If I get the B20 in maybe, I might just drive down to hangout if enough TBrs sign up.

[Tfest]

i wont be dyno'ing and i might not even be on this coast... photoshop world is in orlando and its the last week of the month...

[Cassie]

i wont be dyno'ing and i might not even be on this coast... Photoshop world is in orlando and its the last week of the month...

noooooooooooooooooooooooooo!

[Tfest]

noooooooooooooooooooooooooo!

sorry babe.

if all goes well i land in pdx at noon on saturday. ill get home around 1. and i might make it out there, it's only 10 minutes from my house.

[swedishK]

if i can get the cash, which i'm thinking i can, i'm in.

[Poik]

I'd really like to make this. Count me in as a definite maybe.

[6kYellowLine]

I missed English Racing's last dyno day, a week or so ago.

I'll try and find some cash, I wanna see what the ****box will pull. I should be well into 300 horse by the end of the month but who knows what's going to happen. Something may break and set me back.

[Slobodan]

Well the HUGE turbo is install on the Zee VW TurboDiesel. I'm continuing to tune the pump for max optimum engine performance. Not maxxing it. No way. I don't expect huge numbers. I'm hoping for a 120RWHP and 150RWTQ.
Thats a big expectation I feel for this engine considering I am still using stock pump cam, stock injectors that are 160k old. No porting, just turbo work, intake work, IC work, and exhaust work.

stock these D24T's were sitting at 103hp and I believe that was crank hp, and 139tq. numbers straight from the Volvo Green book. stock boost is also 9~11psi. I'll be running around 13~15psi when I dyno. Should be fun!! Also I will be burning B99 biofuel when dynoing because I run it normally. I do notice MORE power with normal Diesel. but I hate running normal diesel, smokes too much and stinks like ass.

[WeezilUSA]

I am really going to try to make it, but won't be able to confirm for another week or so.

[Captain Bondo]

I won't quite be ready. :-( I am in for something in April though if you guys have anything coming up. I'd love to come dyno and/or do some racing one weekend. I can't make iPD this year so I'd lbe nice to take some other chance to hang with the portand guys. :nod:

[neptune]

I'm still in. What time should we be there?

I'll dyno the 242, since I doubt they'd appreciate the Bertone dumping power steering fluid all over their floor and I'm not going to be able to swap steering racks by then.

[klr142]

10AM they'd like to start. :) Thanks!

[Ferris Bueller]

I'm in. I'll be bringing a buddy that wants to Dyno his 1.8T GTI for a baseline before his heavier mods start.

I'll probably dyno the 245, and shoot for 92 whp.

Shawn- Run the R. DO IT!

[JohnBradley]

Sorry I failed to get in this thread earlier. We look forward to all that can make it to dyno and all those that wanna be there to hang out and cheer/jeer their friends.

For those wanting to tune, we usually do anything over 3 pulls as a 100 for an hour. Its up to you if you think the car is done or not but I find that unless there are odd problems most cars are good to go withing 6-8 pulls. We have fans to keep the intercoolers cold and a water sprayer to help as well.

Thanks

Aaron

[klr142]

Thanks Aaron!

[klr142]

Actually, Aaron, are you guys going to be wanting to get out of there at 5ish for the drags? I think we may butt against that if we do too much tuning...


Who's in?
1. Me
2. Collan/DurableSwedish
3. Logan/Neptune
4. Kevin/Slobodan
5. Nolan/fivedoorfury
6. Shawn/X8lX8SCR/Phillieboy
7. Nick/Nchoy
8. /Sickboy148
9. Galen/old school
10.

Maybies:
11. Andy/SwedishK
12. Kevin/Scott/77volvo245
13. Trevor/F13ND
14. Cassie/Cassie
15. Erik/Poik
16. Ben/WeezilUSA
17. Warren/xcites40
18. Harald/harribert
19. Nick/6kYellowLine
20. Friends of Volvo people
21. Friends of Volvo people
22. Friends of Volvo people
23. Friends of Volvo people
24. Friends of Volvo people
25. Friends of Volvo people
26. Simon/sbabbs

PS. (possible drag racing afterwards at PIR?! with late night SHARIS afterwards!?)

[Freq]

****, if it were any day OTHER than the 27th I'd be totally down. :(

[Quin]

14. Cassie/Cassie
19. Nick/6kYellowLine

uh oh.

PS. (possible drag racing afterwards at PIR?! with late night SHARIS afterwards!?)

without question.

[Jerd]

hmmmm

for some reason i drove all the way up there for ikea...

Whos house can i sleep at?

Put me on the maybe list.

[Quin]

Whos house can i sleep at?

andy's.

[Jerd]

Don't volunteer other people you *******.

[Quin]

Don't volunteer other people you *******.

don't turn down my offer, *******! <333

[Danyul]

don't turn down my offer, *******! <333

It'd be such a long drive though, again. Rofl! We'd be home for like 4 or 5 days, then just turn around and drive 7 hours north instead of south this time. :-P

[klr142]

It'd be such a long drive though, again. Rofl! We'd be home for like 4 or 5 days, then just turn around and drive 7 hours north instead of south this time. :-PIt's a Volvo, they're designed to do it!

My place has an open room and multiple sleeping couches available, too.

We're going to keep the list to VOLVOs only I think, as we're starting to fill up and there are some people(mostly pushrod cars) that want to tinker a little bit in between runs. Hell, I could tinker a bit too(cam timing).

[Stereophile33]

hmmm maybe this would be a good day to pull out the race car and give it a quick shake down before the big day.

[WeezilUSA]

hmmm maybe this would be a good day to pull out the race car and give it a quick shake down before the big day.

THIS.:nod:

[F13ND]

Kyle I'll take you up on a couch, don't know about dynoing though.

[Cassie]

it'd be such a long drive though, again. Rofl! We'd be home for like 4 or 5 days, then just turn around and drive 7 hours north instead of south this time. :-p

omg, yes yes yes! Come!

[WeezilUSA]

2010 First Annual NW Tbricks Shootout? Wooo!

[klr142]

2010 First Annual NW Tbricks Shootout? Wooo!Nick calls that sort of stuff Inaugural or whatever. Lol. And we did a winter dyno day last year, it just wasn't this "late" in the winter. We will totally do it again!

And, sounds good Trevor. :)

[Tfest]

anyone want to help tinker with my car? i bet it's all sorts of messed up with how it's configgered...

[Freq]

omg, yes yes yes! Come!

How has anyone not... no... nevermind...

[F13ND]

That's what she said!

[Ferris Bueller]

:lol:

Maybe I should try to +T before I embarass the 245... I have a dyno slip for 91whp that came with the car lol.

Or should I dyno my '85 toyota pickup? haha

[WeezilUSA]

I'll Dyno my WRX if I haven't sold it by then, and vurbo is still out of comission.

[klr142]

Volvo power!

[Tfest]

no? ok... you're all gonna laugh at me. lol

[Ferris Bueller]

I would end up breaking something, or I'd offer to help.

I'm sure you'll do well! You going to have a clutch by then?

[Tfest]

I'm sure you'll do well! You going to have a clutch by then?

nope, im coming there straight from the airport, thats the day i get back from photoshop world...

[klr142]

Turn the boost down enough and we can see what she does. :)

[Tfest]

Turn the boost down enough and we can see what she does. :)

it slips at 10 psi. lol

[swedishK]

andy's.

Don't volunteer other people you *******.

don't turn down my offer, *******! <333

how rude jered. how rude. you can crash on my couch if you need to.

[WeezilUSA]

it slips at 10 psi. lol

We'll pop the inspection cover and spray some contact adhesive in there. Problem solved:)

[Tfest]

We'll pop the inspection cover and spray some contact adhesive in there. Problem solved:)

inspection cover? on a m47? and no gluin my clutch, lololololoololol

[Jerd]

I heard grape soda works.


Im doubting i will make it but its still open.

[Ferris Bueller]

I'm having a 531 head delivered to the meet. I HAVE to show up!!!

[6kYellowLine]

I'll be in California and pissed off. I'll get the next one, or just troll english racing until another day pops up since they're dsm friendly.
I might be back in time for it, but who knows. I may be back the night of the 27th so If I show up, cool and if not even better?

[Ferris Bueller]

double post fail

[6kYellowLine]

I don't understand the benefits of the 531 head...

[klr142]

Bigger intake ports, slower velocity, but smoother shape, duh.

[Stereophile33]

it slips at 10 psi. lol

let me have it for a day then she won't slip :oogle:

[Tfest]

let me have it for a day then she won't slip :oogle:

only if you help me tune it, figure out the timing and btm from my msd to make it all happy... and maybe throw a clutch in...

[Stereophile33]

I'm sure something can be arranged:-D

[Tfest]

I'm sure something can be arranged:-D

:omg:

[Quin]

:omg:

believe it or not, jonathan actually works for a company that specializes in the modification and tuning of volvos. i know, i was just as surprised as you.

[Tfest]

believe it or not, jonathan actually works for a company that specializes in the modification and tuning of volvos. i know, i was just as surprised as you.

yeah, what am i sayin. i wont have car money till late summer, oh well. lol.

[klr142]

Nobody told you to put an MSD on it... :-P

[Tfest]

Nobody told you to put an MSD on it... :-P

the msd works fine, its the stock clutch i had to use since clutchnet sent me something from a completely different car and wouldnt be able to replace it soon enough. they quoted me 4-6 weeks....

plus i dont even know where to set the stock timing. currently its at 13deg...

[klr142]

That's perfect. Now it's tuned and ready to go. :)

[Tfest]

That's perfect. Now it's tuned and ready to go. :)

butbutbutbut, ill get 76 hp again...

[Cassie]

I will not be making 13 dozen cookies again, but i'll make some...if you're good.

[Tfest]

I will not be making 13 dozen cookies again, but i'll make some...if you're good.

ill be good then

[swedishK]

I will not be making 13 dozen cookies again, but i'll make some...if you're good.

i require exactly 13 dozen cookies. and will be sorely disappointed if there isn't 13 dozen cookies at the dyno day. i will be filled with uncontrollable rage.

[klr142]

List updated.butbutbutbut, ill get 76 hp again...Nah, you should be able to manage at LEAST 77 now. The turbo has to count for something, even if it's only putting out 0psi. And heck, you have a fresh motor now! That other one was worn to hell with half of the combustion gases going in between the pistons and the block... Or at least it sounded like it. :) Can I put you down on the confirmed list?
I will not be making 13 dozen cookies again, but i'll make some...if you're good.As long as you make enough for me to have 1 dozen, I won't complain.



If anyone does not see their name on the list, or it's not in the right spot, let me know!

[F13ND]

I want one Baker's dozen cookies, and 13 dozen horsepower.

[swedishK]

If anyone does not see their name on the list, or it's not in the right spot, let me know!

put me down for definite.

[klr142]

Yay!

[Tfest]

List updated.Nah, you should be able to manage at LEAST 77 now. The turbo has to count for something, even if it's only putting out 0psi. And heck, you have a fresh motor now! That other one was worn to hell with half of the combustion gases going in between the pistons and the block... Or at least it sounded like it. :) Can I put you down on the confirmed list?


only if they do the pull in 2nd gear, thats the only one that dont slips

[Poik]

only if they do the pull in 2nd gear, thats the only one that dont slips
The load will be less on the dyno as well..

[Tfest]

The load will be less on the dyno as well..

tempting...

we'll see what i can get done to it before i come in. i need to change the fluids out. i return from orlando that morning so i should be at english racing around 1pm.

[Ferris Bueller]

Can my name be next to my username?:oops:

Hi, My name is Dave.

Also, a for sure is Micah (not a bricker, but is bringing a GTi to dyno)

[klr142]

Can my name be next to my username?:oops:

Hi, My name is Dave.

Also, a for sure is Micah (not a bricker, but is bringing a GTi to dyno)Yes! Sorry, I didn't have a chance to look up your name. I'm Kyle, nice to meet you Dave. :)

Tom, the only fluid you could possibly need to change is your oil. That's a 15 minute job, I have faith that you can get it done! We can do a third gear pull, no problem. If it slips at whatever boost you're currently running we can just turn it down a smidge more. NO PROBLEM. Let's do it!

[Tfest]

Tom, the only fluid you could possibly need to change is your oil. That's a 15 minute job

took 2 hours last time.... ever spin the housing off an oil filter leaving the rest screwed onto the block before? ... i have... the filter bakes to the block, its totally rad, every time. i sprained my thumb changing it once.

put me down as a DEFINITE as long as my plane isn't delayed. i should be there at 1pm. ill post in here from the Houston Airport before i get on the 2nd plane from florida to come home.

[WeezilUSA]

Hey Kyle,

Put me down as a definite, its just not 100% that its the 242 that will be spinning the rollers... I might have to bring the 940 to keep it in the volvo family.

[klr142]

took 2 hours last time.... ever spin the housing off an oil filter leaving the rest screwed onto the block before? ... i have... the filter bakes to the block, its totally rad, every time. i sprained my thumb changing it once.

put me down as a DEFINITE as long as my plane isn't delayed. i should be there at 1pm. ill post in here from the Houston Airport before i get on the 2nd plane from florida to come home.Sweet. And, unsweet. What kind of oil filter are you using?!? Remember not to gorilla it on there, too.Hey Kyle,

Put me down as a definite, its just not 100% that its the 242 that will be spinning the rollers... I might have to bring the 940 to keep it in the volvo family.Done!

[Tfest]

Sweet. And, unsweet. What kind of oil filter are you using?!? Remember not to gorilla it on there, too.Done!

just the mann one. and of course i dont gorilla it on there, c'mon now. :-P

it literally bakes on, sitting there all nice and warm under my exhaust mani. i was gonna get a strap wrench to try to get it off. last time i changed my oil i didnt have time to monkey with it so, new oil, old filter.

there's not enough space behind it to get a wrench on because of the 3" dp.

[harribert]

You kiddies have fun! I won't embarrass myself by showing up ;-)

[WeezilUSA]

You put oil on the seal before you put the filter on? Just a thin film really helps to keep it from baking to the block.

[WeezilUSA]

You kiddies have fun! I won't embarrass myself by showing up ;-)

Come no Harald, we need a cheerleader!

[Ferris Bueller]

You kiddies have fun! I won't embarrass myself by showing up ;-)

Dude, you'll beat me by at least 15 whp! You have to come!

Tintz and HIDz!

[Tfest]

You put oil on the seal before you put the filter on? Just a thin film really helps to keep it from baking to the block.

i do that for all oil changes. even pb blaster doesnt loosen it up. lol.

[harribert]

Come no Harald, we need a cheerleader!

Dude, you'll beat me by at least 15 whp! You have to come!

Tintz and HIDz!

I was just flattering you guys! I'll be in newport, (hopefully) enjoying the sun, amongst other things :oogle:

[Tfest]

now im really excited for this. this weekend ill install catch can, black heat wrap and use a lightsaber to get my oil filter off.

[Poik]

Flathead screwdriver works much better.

[Tfest]

Flathead screwdriver works much better.

id like to see you try it... cuz it doesnt work at all.

[sbabbs]

You can poke through it with a flathead screwdriver and get them off that way, but you might just destroy the sucker also. I like to use big channel locks.

[Tfest]

You can poke through it with a flathead screwdriver and get them off that way, but you might just destroy the sucker also. I like to use big channel locks.

not enough room. tried the screw driver once, thats how the housing came off of the filter....

[Poik]

I've only had to do it once, and it worked great. I think I used a hammer too.

[klr142]

I was just flattering you guys! I'll be in newport, (hopefully) enjoying the sun, amongst other things :oogle:Sucks to be you...
Flathead screwdriver works much better.The trick is to point the screwdriver at the BASE of the filter, and tap on it at an angle towards the rotation of getting the filter off. A few taps should get the thing starting to turn(if you really can't get it loose), and then you can finish it by hand. I used to have to use this sort of method on POS Peugots I used to change the oil on when I worked at Eurocar.

[WeezilUSA]

I've had pretty good luck with this style oil filter wrench... is there something preventing access for something like this?
http://a1toolsales.com/images/oil%20filter%20wrench.jpg

[Tfest]

I've had pretty good luck with this style oil filter wrench... is there something preventing access for something like this?
http://a1toolsales.com/images/oil%20filter%20wrench.jpg

yeah, the down pipe, lol.

[WeezilUSA]

Oh, and you probably still have an alternator in the way in front of it eh? I keep forgetting that I have made access in my engine bay exponentially easier by deleting things...

[Wilford Brimley]

I might come if I can scrounge up some gas money

[Ferris Bueller]

I think I might bring some snack treats for people, too.

What kind of a dyno is this? Turns out the 91whp run on my car was done on a Mustang dyno. I'll be happy if I can pull 85whp this time :lol:

[6kYellowLine]

I'm most def. coming.


Hard coming.

I think I might bring some snack treats for people, too.

What kind of a dyno is this? Turns out the 91whp run on my car was done on a Mustang dyno. I'll be happy if I can pull 85whp this time :lol:

if you're kjetted we can pull some more power out of it.

[klr142]

I'm most def. coming.


Hard coming.Ooooooh jeez. What car?

[Tfest]

i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time, i hope my plane lands on time,

[Ferris Bueller]

That LASER is going to put down some decent numbers, methinks.

Tom- I hope your plane lands on time

[6kYellowLine]

That LASER is going to put down some decent numbers, methinks.


I'm shooting for 280hp. 300 if weather turns out to be good and the pocket does for a fatter fuel line.

Ooooooh jeez. What car?

The laser. I'm not sure but I'm trying to source a bigger turbo since I just pulled the one that's on it for inspection. If i can find a 'big' 16g then that's going on but there's only a couple days left for my hunt.
The 'small' 16g suits it really well for 2liters cammed to all hell but room for improvement is always good.

Hows your car doing? Gonna lay down some good numbers?

[DurableSwedish]

anyone have a cheap/good MBC I can buy? My boost is low at 11, I used to run 17 with no problems. at least 15 should be more potent. I fixed my intercooler hose so I boost strong now. Need to switch lowering springs and remove the 400lbs of tools/junk in the car. (Also get a OR license and some plates on the 244...) I'm trying! :-)

[Ferris Bueller]

http://www.dsmtuners.com/forums/articles-parts-fabrication/326612-add-boost-under-30-bucks-home-depot-boost-controller-fuzzy-pics.html

make one on the cheap?

[Tfest]

anyone have a cheap/good MBC I can buy? My boost is low at 11, I used to run 17 with no problems. at least 15 should be more potent. I fixed my intercooler hose so I boost strong now. Need to switch lowering springs and remove the 400lbs of tools/junk in the car. (Also get a OR license and some plates on the 244...) I'm trying! :-)

get a hallman pro offa ebay. $70ish. ive had mine since i first started the new motor, it works VERY well.

[Tfest]

oh and it sucks, going down the fwy, want to pass a car and you CANT floor it... god damn clutch...

[Wilford Brimley]

I just built an mbc out of 4 pieces :lol:

[6kYellowLine]

I've got a perrin ceramic mbc. . .
<_<
>_>
Home made ones aren't great. Creepy spikey buggers.

[WeezilUSA]

I've got a perrin ceramic mbc. . .
<_<
>_>
Home made ones aren't great. Creepy spikey buggers.

Depends on how you make it... The only piece that is ceramic w/ the perrin one is the ball itself... What gets spikey is if your home made controller is a bleed, and not a ball and spring.

[F13ND]

oh and it sucks, going down the fwy, want to pass a car and you CANT floor it... god damn clutch...

You won't have to drive far to get there.

[Tfest]

You won't have to drive far to get there.

3 miles from my house!

[F13ND]

Push it! Keep the intake temps down.

[Tfest]

Push it! Keep the intake temps down.

this is why im wrapping the dp with heat tape this weekend...

[JohnBradley]

I will not be racing the saturday of the 27th (though I'll show up to the track), so we can stay as long as need be and then catch up with everyone after all that want on the dyno have had the chance.

I am hoping to get Nathan to come down or at least let me bring his Intake Manifold down for the day for all those that would like to drool. He is getting close on his new build :) One of these days if John Lane gets the car back to snuff I promised him free dyno and tune time just to have that car on the rack.

Aaron

[klr142]

One of these days if John Lane gets the car back to snuff I promised him free dyno and tune time just to have that car on the rack.I'm pretty sure we will HAVE to make this some sort of event... Yes, yes indeed!

[klr142]

What kind of a dyno is this? Turns out the 91whp run on my car was done on a Mustang dyno. I'll be happy if I can pull 85whp this time :lol:Missed this, a Dynojet! What car will you be dynoing and what's done to it? What transmission?
That LASER is going to put down some decent numbers, methinks.

Tom- I hope your plane lands on timeI hope his plane lands on time too! And, a LASER!? :lol:

[Ferris Bueller]

My car is The Professor, Danny melville's old blue/white 245. B230, K cam, adj cam gear, Stahl header, IPD cat back.

Aaron- That 531 will be at the dyno day, yes?:hyper:

[klr142]

My car is The Professor, Danny melville's old blue/white 245. B230, K cam, adj cam gear, Stahl header, IPD cat back.AWESOME!!! Nice work. I heard it was down here somewhere... :)

[Ferris Bueller]

yup, I'm still trying to learn 240s, but at least there's a really solid platform to start with. I'll be building a B230FT soon for it, and I'm trying to figure out the whole T-5 swap thing:lol:, so that *hopefully* by fall, I can see how different the car is:)

[6kYellowLine]

Clutch holds at 16psi

but slips like mad at 18psi
BAAHHHHH

[A-Bro240]

Hey,

I'm new to portland, any room for a poor person with a stock 240 to come hang out with the cool volvo kids? :oops:

[klr142]

But of course! No one will get mad at anyone else for watching!

[Ferris Bueller]

please join us! I might be bringing bacon potato chips:)

[B-dub]

I'm down. I won't have the wagon ready, but i'm all about kicking it for a day!

I will not be making 13 dozen cookies again, but i'll make some...if you're good.

I did it all for the cookie?

[Freq]

Hey,

I'm new to portland, any room for a poor person with a stock 240 to come hang out with the cool volvo kids? :oops:

Just don't be ant-social. And know everything about cars there ever was to know. Else some elitists might think you're rude. ;)

[nathaninwa]

I dont think Ill be makin it down. Im almost done with the last 4 8v intakes for a while.....I should have my parts from RSI by then and will be assenbling the shortblock and finish up on the first 16v intake design. Im was working with Aaron yesterday and got a tuned runner length for a 7k power band. I an going to try a straight....tapered runner 16v intake. MAN, does the 16v have some nice intake ports!
And I need to build a header too.......Cameron has kind of challenged me to have my car at the Garage sale!

Good luck to guys......Aaron is great

[JohnBradley]

My car is The Professor, Danny melville's old blue/white 245. B230, K cam, adj cam gear, Stahl header, IPD cat back.

Aaron- That 531 will be at the dyno day, yes?:hyper:

Not sure if you meant me or another Aaron, but what 531?

I dont think Ill be makin it down. Im almost done with the last 4 8v intakes for a while.....I should have my parts from RSI by then and will be assenbling the shortblock and finish up on the first 16v intake design. Im was working with Aaron yesterday and got a tuned runner length for a 7k power band. I an going to try a straight....tapered runner 16v intake. MAN, does the 16v have some nice intake ports!
And I need to build a header too.......Cameron has kind of challenged me to have my car at the Garage sale!

Good luck to guys......Aaron is great

Awww shucks. I wont say I am great but I do what I do well. I am actually very jealous of the 16v intake ports. I have about 4 days worth of welding and reshaping to get a Mitsu to match and even then it might not be possible. They remind me of some streetbikes and an indy motor I have seen. The entry angle is totally unbelievable.

Aaron

[nathaninwa]

Not sure if you meant me or another Aaron, but what 531?



Awww shucks. I wont say I am great but I do what I do well. I am actually very jealous of the 16v intake ports. I have about 4 days worth of welding and reshaping to get a Mitsu to match and even then it might not be possible. They remind me of some streetbikes and an indy motor I have seen. The entry angle is totally unbelievable.

Aaron



That 531 is the sweet head I welded the port up on tonight......hehe

And I think keeping the straight runners will make for a good first try....Im going to try and roll the intake plenum a little....nothing major. But it needs to look good, and having the injectors on the bottom, well the theyll hav to be offset to the sides of the runner a little, the flange bolt is right in the way to have them centered.

[michael98632]

i wont be able to make the 27th.. but can someone tell me how ide manage to dyno my car? im an over the road truck driver and i only get 4 days off around the 17th

[Ferris Bueller]

i wont be able to make the 27th.. but can someone tell me how ide manage to dyno my car? im an over the road truck driver and i only get 4 days off around the 17th

I saw your car at jack in the box in Longview a while back. my 245 was parked outside, you went through the drive thru...

Just hold out for a dyno day, check other forums, or schedule a private dyno session? In any case, it'll be worth the cost (unless you're me, putting a NOW guestimated 75 to the wheels)

Nathan-Thanks man, I'm excited to look at it. I almost wanna say you should send an intake mani down just so we can drool over it...Those things are nice

[Tfest]

When does this end in the afternoon?

cuz - Arrival (PDX): March 27, 11:17 AM PDT - is what I'm hoping really happens. means ill be there around 1230pm.

[Ferris Bueller]

<---winner of least HP

[Tfest]

<---winner of least HP

i won last time, 76hp FTW!!!

[Ferris Bueller]

Shawn thinks he can make less than me. I say NO!

[Tfest]

if he brings the silver wagon he can.

[klr142]

When does this end in the afternoon?

cuz - Arrival (PDX): March 27, 11:17 AM PDT - is what I'm hoping really happens. means ill be there around 1230pm.We'll probably be going until/past 5pm.
<---winner of least HPYou hope! Haha, you never know what'll show up...

[Tfest]

we'll probably be going until/past 5pm.

amazing

[Ferris Bueller]

if he brings the silver wagon he can.

I think he's going to!!! ARGH! :rofl:

prepare for gong show

[Shawn!]

I is I is.

[Ferris Bueller]

http://nsaney.com/pics/al_gore_excelsior.jpg

[klr142]

First post up to date, I think?

Who's in?
1. Me
2. Collan/DurableSwedish
3. Logan/Neptune
4. Kevin/Slobodan
5. Don/abdlock
6. Shawn/X8lX8SCR/Phillieboy
7. Nick/Nchoy
8. Dave/Sickboy148
9. Galen/old school
10. Keith Martin
11. Kirk Nelson
12. Peter/daytonat100
13. Jay/srpntn
14. Andy/swedishK
15. Ben/WeezilUSA
16. Tom/Tfest
17. Nick/6kYellowLine
18. Eric/Poik
19.
20. Some friend of Dave's with a GTi

Maybies:
21. Ross/byte1032
22. Kevin/Scott/77volvo245
23. Cameron/volvorelix
24. Jonathan/Stereophile33
25. Danny/dmelviØØ7
26. Jered/Jerd
27. Nolan/fivedoorfury
28. Jason/drj434343
29. Richard/Volvogeek
30. Cameron/Cameron
31. Aaron/YellowT5-r
32. Simon/sbabbs
33.
34.
35.
36.
38.
39.
40.

[Poik]

You can switch me from a maybe to a yes. And it's Eric :P. I can't wait for this!

[Tfest]

And it's Eric :P. I can't wait for this!

but the K adds interest and makes you sound mysterious and eccentric.

and i am excited too!

[Poik]

but the K adds interest and makes you sound mysterious and eccentric.

and i am excited too!
No it makes me sound like I'm Norweigian.

[Tfest]

No it makes me sound like I'm Norweigian.

my brother lives on 236th street.

[Poik]

Does he have a Viper?

[Tfest]

Does he have a Viper?

no, he manages some apartments out there, no car.

[WeezilUSA]

Boost controller came today... If all goes well, I'll be on the road this weekend, ready to rumble!

[klr142]

w00!You can switch me from a maybe to a yes. And it's Eric :P. I can't wait for this!Sorry, I got used to all the wierdos who spelled it the other way around.

[Ferris Bueller]

woohoo! Dyno day!

[Tfest]

and of course the 240sx ricerfags i know are already giving me ****... ugh.

[Ferris Bueller]

for what?

[Tfest]

for what?

the lack of rwhp ill be making

[klr142]

At least you have an excuse(clutch). :lol:

[Cameron]

At least you have an excuse(clutch). :lol:

Hey don't knock that clutch -- the price was right.

[Ferris Bueller]

wish I had an excuse. Actually, I do. base line...

[Tfest]

At least you have an excuse(clutch). :lol:
the price was right, $0, THANKS CAM


wish I had an excuse. Actually, I do. base line...

my baseline was 76, then i replaced everything, which negates said base line... so this will be new base line!

[Ferris Bueller]

yurp, I'll be going for a new base line after this, too. I think this might just be for everyone's entertainment, and because apparently I have more money than I need...?

Is Dave's friend with a GTI getting a for-sure spot by chance? He needs the dyno more than I do:lol:

[F13ND]

I'll be there for sure, but I won't be strapping in.

:nancy:

[NChoy]

I will not be making 13 dozen cookies again, but i'll make some...if you're good.

COOKIES!!!

http://img91.imageshack.us/img91/4440/cookiemonsterwithtext.jpg

[klr142]

Is Dave's friend with a GTI getting a for-sure spot by chance? He needs the dyno more than I do:lol:Yeah, we can get him in. Who's Dave? :rofl: Why are you referring to yourself in third person? Confused me for a sec there... :)

[Tfest]

we may have a saabaru on the rollers... he got 225 last time at the same place and now he has a full exhaust...

[Ferris Bueller]

Yeah, we can get him in. Who's Dave? :rofl: Why are you referring to yourself in third person? Confused me for a sec there... :)

:rofl:Just said what was on the #20 spot, because I thought it was funny. "some friend of Dave's":rofl:

[kammer]

Is there still room to get in on this? I've got some funds and I want to baseline my car. It will probably be in the cellar as far as hp goes. However, I'm going to upgrade the exhaust and put a B cam in soon and want to see where I'm at with the stock setup.

Plus, it's been awhile since I been to an event.

[klr142]

Greg, we'd be glad to have you, there is no deadline or cut-off for this, it's just come and run whatcha brung!

BUT! I, and many others would love it if you could return to OVT(may need to update DNS crap:http://forums.turbobricks.com/showthread.php?t=199366) and tie up some very loose ends you left. Specifically near when you stopped frequenting the forums, yet were still trying to sell stuff.

[NChoy]

Bad form to air dirty laundry. I'm going to take the high road and PM someone right now. (see how I'm not mentioning who?)

[klr142]

Bad form to air dirty laundry. I'm going to take the high road and PM someone right now. (see how I'm not mentioning who?)Huh?

[6kYellowLine]

He's probably referring to the lack of unnecessary TB drama.

[klr142]

He edited his post to not include some unnecessary drama. :)


LET'S DYNO! And I sure hope the weather holds out for some drag racing too...:-D

[NChoy]

LET'S DYNO! And I sure hope the weather holds out for some drag racing too...:-D

Unless of course we break things on the dyno :(

[Tfest]

well, after all my spirited driving this week making sure the engine can handle 16ish psi, im now ready and have a lot less life in that one rear tire that spins all the time. :)

[Ferris Bueller]

woohoo!!! clutch holding okay?

[Tfest]

woohoo!!! clutch holding okay?

mostly, im sure it will hold on the dyno.

[DurableSwedish]

I need to replace the starter in my sc300 so I can bring it. The 244ti has a really bad misfire (also 1 year expired plates) At the least, I'll bring the mercedes.

[PRVersion]

i'll be there with the 75 fo sho, but no pulling for me.

[nathaninwa]

WOW, you guys are going to be keeping them English boys busy! sickboys head is in route along with a complete 8v intake for you guys to look at. Its not forsale tho....

[WeezilUSA]

MS issues oh my! Eff. Hopefully can get it sorted, but i'm hitting a wall at 4100 rpm, but hopefully will have that sorted out by saturday. If vurbo does make it down, I think I'm just going to see what she'll do on stock boost level... of course I say that now, but will probably be singing a different tune if its running well.

[sroselli]

$ has gotten short so I will not be dynoed that day. I will show up still though.

X8lX8SCR/Phillieboy

sorry been using this account lately.

[Ferris Bueller]

I'm going to volunteer myself to go as one of the last cars, just to make sure the people that actually need to dyno get a chance before I put my embarassing numbers down.
<-----now DEFINITELY going to be getting lowest:lol:

[sroselli]

your welcome for that Dave.

[JohnBradley]

Gonna have to cap this at 32 cars. Anymore than that and we'll have to do 2 days or something.

[klr142]

Haha, we should be fine it sounds like Aaron, thanks!

[Davin]

If there is a spot for me I'd like to get some numbers for my bucket-o-bolts too.

[Ferris Bueller]

If you want my spot, i'll step aside. i'm still going, but I don't need to dyno, really.

[klr142]

There's room for both of youse. ;-)

[Davin]

Sweet! Count me in then.

[Cameron]

Kyle you can take me off the maybe list. Doesn't look like I'll be able to make it down that day. Rechecked the calendar for that day and forgot my wife is off volunteering planting trees that morning until 1:00 so I'll have my son and then I have to DJ a party that evening that I have to get equipment ready/loaded for.

If my boy was bigger I'd bring him, but I think a dyno is a bit loud for an 11 month old. Even though I know he'd LOVE it :rofl: He's a boy through and through -- if it's loud, shiny or has boobs, he loves it :zeeall:

[WeezilUSA]

Hey Kyle... I'm really sorry, but please take my name off the definite list... no use in driving a problematic car 300 miles just to find out what it will make under 4k... I think I will still be there, with Poik probably.

[klr142]

Current, to my knowledge... Ben, come! Turn down the boost to 10psi and come!
Who's in?
1. Me
2. Nick/6kYellowLine
3. Logan/Neptune
4. Kevin/Slobodan
5. Don/abdlock
6. Davin
7. Nick/Nchoy
8. Greg/kammer
9. Eric/Poik
10. Keith Martin
11. Kirk Nelson
12. Peter/daytonat100
13. Jay/srpntn
14. Andy/swedishK
15. Ross/byte1032
16. Tom/Tfest
17. Dave's friend with a GTi
18.
19.
20.

Maybies:
21. Greg/shift_slide
22. Kevin/Scott/77volvo245
23. Cameron/volvorelix
24. Rye/RZT5
25. Danny/dmelviØØ7
26. Jered/Jerd
27. Nolan/fivedoorfury
28. Galen/old school
29. Richard/Volvogeek
30. Collan/DurableSwedish
31. Ben/WeezilUSA
32. Simon/sbabbs
33. Matt/Mad Matt
34.
35.
36.
38.
39.
40.

[Ferris Bueller]

Unfortunately, my current bank balance isn't going to let me run. My friend with his GTi is going to run his car for sure (finishing up the IC tonight), but I'm pretty broke, and trying to save whatever I can for my vacation that starts tomorrow...

:oops:
I'll be down there, but can't run

[Davin]

They're droppin' like flies! Come on, we need a couple more for sure's so it's only $50.

[klr142]

Damn flies!

[DurableSwedish]

argh! I'm trying to get the sc running to make it, Another $100 starter and now I need another $100 battery! :-( I really want to dyno my car...We will see if I can get it up and going tomorrow. Threw almost $1k at the Volvo and sc300 this month and neither of them run well enough to drive over there. The 242 mysteriously died last week too. Drove to work fine, now won't start. Fml. :-(

[Ferris Bueller]

<---lame! the Gti will be pulling for sure, thanks to 6kyellowline. That's where my dyno money is going. Can't wait to see what it puts down.

[coldfusion21]

sounds like the typical t-bricks get together. 100 people say they are coming for sure, 25 show up.

I may come watch. Work till midnight the night before so i will be in no hurry to get up. If the BMW ran i would dyno for sure.

[kammer]

I'm in, for sure.

[klr142]

sounds like the typical t-bricks get together. 100 people say they are coming for sure, 25 show up.

I may come watch. Work till midnight the night before so i will be in no hurry to get up. If the BMW ran i would dyno for sure.Sweet! Haven't seen you at a Volvo thing in AGES. It's not that bad, there's only been like 3 or so people who went from being on the yes to maybe/no list.I'm in, for sure.Awesome!

[WeezilUSA]

I'll try throwing some more resistors in my VR signal line tonight, if it resolves the problem, then I'll figure out a way to be there (financially lol)... Man I'm going to need to find some ear plugs for the drive down too.

[WeezilUSA]

And on that note... I will be there either way, but probably as Poik's co-pilot/tuner and not driving vurbo. Will bring Camera and camcorder :)

[klr142]

Poik's co-pilot/tuner and not driving vurbo. Will bring Camera and camcorder :)Good! We'll need them. :)

[JohnBradley]

See you guys tomorrow :) I'll be down a little earlier to make sure everything is clean and looking pretty.

[Poik]

And on that note... I will be there either way, but probably as Poik's co-pilot/tuner and not driving vurbo. Will bring Camera and camcorder :)
You should still try to find a pair of ear plugs lol

[A-Bro240]

What time is this shindig goin down?

[klr142]

Starts at 10AM, ends at 2AM or so, probably. My cell number's 502-1997 if any of you need to know where things are at the moment.

[Ferris Bueller]

:hyper:

[Quin]

backup plan if the drags are rained out?

[Wilford Brimley]

suckfest.

[DurableSwedish]

changed the spark plugs in the 244 and a olddog helped fix my super lean a/f ratio so the car runs better. I bought insurance on the car, just need to find a DMV open tomorrow morning to get a trip permit. I really hope it doesn't blow up on the freeway driving it up to the dyno. Anyone from beaverton want to caravan up there?

[klr142]

Back up plan... Who has a house large enough to hold a buncha peoples and not have pissy neighbors that would cry if a gang of Volvos took over???

I'm in the middle of swapping in the Yoshifab phenolic intake spacers and then I have to go home and install the meteors and remove extra junk from the car.

[Cassie]

I am volunteering rob to volunteer for a party place. :P
Will there be burgers again tomorrow? Mmmm burgers.

[Cameron]

Who has a house large enough to hold a buncha peoples and not have pissy neighbors that would cry if a gang of Volvos took over???


If I were gonna be home I'd offer up my place but I have a previous engagement. I'm sure that hanging out with you guys would be way better than the party I have to DJ :grin:. Gonna be kind of suckfest due to the music they want. Good thing it pays well :zeeall:

[WeezilUSA]

Swapped a bigger resistor into my VR signal, and it brought my wall up to 5200 rpm... But vurbo isn't going to be making the trip tomorrow... maybe next time. See you guys (and gals) in the morning!

[klr142]

I am volunteering rob to volunteer for a party place. :P
Will there be burgers again tomorrow? Mmmm burgers.Waaa, burgers? I'm getting hungry. Still gotta work on the car though. Maybe I should get off the computer. :doh:
If I were gonna be home I'd offer up my place but I have a previous engagement. I'm sure that hanging out with you guys would be way better than the party I have to DJ :grin:. Gonna be kind of suckfest due to the music they want. Good think it pays well :zeeall:MONEY! :lol:

[F13ND]

Is ipd open tomorrow? I bought the wrong boot for my clutch fork. :grrr:

[Cameron]

Is ipd open tomorrow?

Nope. Sorry.

[Cassie]

i might bail out on you guys and go snowboarding..it seems like its gonna be the best day of the season. sunny and 16 in of new powder...hmmmmmm.

i made cookies already too. hmmm

[WeezilUSA]

i might bail out on you guys and go snowboarding..it seems like its gonna be the best day of the season. Sunny and 16 in of new powder...hmmmmmm.

I made cookies already too. Hmmm

booo!!!!!!

[Cassie]

ill bring the cookies to the after party

[nathaninwa]

Man, sure would be nice to meet all you guys.....no drool on the intake! Cameron just gave me more work to do....May 15th will be here in no time! Good luck all on the Dyno!

[klr142]

i might bail out on you guys and go snowboarding..it seems like its gonna be the best day of the season. sunny and 16 in of new powder...hmmmmmm.

i made cookies already too. hmmmLame. Aren't you already broken enough?

[swedishK]

my house is big. enough.

[klr142]

w000!

I'm going to sleep. I'll be productive in the morning, dead for now though.

[DurableSwedish]

Found that the Tanasborne DMV is open Saturday at 8am, so I'm headed out there now to try and get a trip permit. I need to change the oil and wash the car before I head over to the dyno. Lots to do this morning. :-)

[DurableSwedish]

another question, what time does everything start? it looks like 18 people are going to dyno, when is everyone showing up?

[klr142]

I think there may be more people at the dyno, but we'll see. As it says in the first post, things start around 10am.

http://forums.turbobricks.com/showpost.php?p=3047453&postcount=221

[holtzboy]

See you guys there, not going to dyno the butter it might melt.

[klr142]

If you fixed the temperature compensation board with a paperclip it might not melt... :-P Assuming you STILL haven't fixed that.

[holtzboy]

I fixed it, I shoved a piece of wire over the two pins and it works great now.

[DurableSwedish]

sweet, got my trip permit, legal insurance too! I need to go change the oil and empty the 400lbs of crap out of the car and stuff it into the dead sc in the parking-lot. I'm on my way!

[6kYellowLine]

On my way.

[6kYellowLine]

thanks for showing up guys I had fun.

I'm worried about my car blowing up so it's still mild boost and base timing. Next one I'll throw some more aggressive numbers down but for a first dyno I'm glad my car did well and didn't blow up!
max power=222.89 max torque=253.07

[Tfest]

sorry i didnt make it. i got home from florida and fell right to sleep... damn long flights.

[holtzboy]

I'll try and get my stuff uploaded this evening. Have fun at the drags and get some footage there too!