PDA

View Full Version : 240 Estate with B19


ace_of_cloves
03-21-2011, 04:29 PM
Hello!
this is my first one here at turbobricks.
I have a little(quite big) projekt on my estate with the B19

the car is from -81 and been "facelifted" to he newer look from 86 and forward.

the B19 is the stock engien in the car and am planing to change it with a B230.
I have equiped the engien with header, 2,5" exhaust, CI-injektion, the 405 head, catcam 283`, dubbel velve springs, titan retainers, adjustabel camgear, 3" intake "flapp"(dont know the word for: spjäll) with the intake from an engien with elektronic injektion(jost for prepering for MS) injectors are from opel/vaukshall vektra GT (241cc) the works only as plugs now.

i think that with the smal modifications it gives abaut 140hp (not much)

the projekt is almoust done but i will post some images ass well.

http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN0977.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN0980.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1401.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1402.jpg
i did smal mods on the part that comes under the sprig so it wont "eat" the part that holds it up.
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1397.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1398.jpg
some of the parts
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1495.jpg
new VS. old
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1498.jpg
header done
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1502.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1503.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1504.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1507.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1614.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1619.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1628.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1506.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1595.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1596.jpg
fuel
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1586.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1592.jpg
exhaust
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1590.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1589.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1663.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1662.jpg
smal interior view
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1593.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1649.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1658.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1656.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1707.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1698.jpg

D.E
03-21-2011, 05:47 PM
Fattar fortfarande inte varför du bygger på en B19. B23 kostar ju ingenting, passar i motorfästena, har högre kompressionsförhållande och är bara bättre på alla sätt.

wisturbo
03-21-2011, 05:54 PM
That's an interesting rear hatch you have. The lack of a rear wiper is something I don't think I've seen before. You wagon looks great, keep it up!

ace_of_cloves
03-21-2011, 06:01 PM
Fattar fortfarande inte varför du bygger på en B19. B23 kostar ju ingenting, passar i motorfästena, har högre kompressionsförhållande och är bara bättre på alla sätt.

jag har använt mig av b19 bara föra att den var i bilen när den köptes. jag har inte haft tid att göra iordning nått block.
har ju "bara" satt toppen på B19. blocket är orört.

ace_of_cloves
03-24-2011, 04:29 PM
That's an interesting rear hatch you have. The lack of a rear wiper is something I don't think I've seen before. You wagon looks great, keep it up!

the owner i bought it from did remowe it when the car was repainted. I think il looks great. i´m going to equip it with white rear turnsignal lamps

Acid8000
03-24-2011, 07:10 PM
That is 10/10 well done sir! For a N/A you really did everything properly. Cant wait to see what you do with a turbo application! And i love how you moved the fuel pump and filter to the front fender area, although would suck to have an accident and hit the area..
Very nice 245.. Tastefully done!

ace_of_cloves
03-27-2011, 07:13 AM
That is 10/10 well done sir! For a N/A you really did everything properly. Cant wait to see what you do with a turbo application! And i love how you moved the fuel pump and filter to the front fender area, although would suck to have an accident and hit the area..
Very nice 245.. Tastefully done!

tanks alot for your positive coment.

well lets se about the turbo part. Why force somthing that sucks voluntarily.( not just cars on that one XD )


and time for a picture updates

had a little truble with the car. when i give full trottle it want to misfire, same when i have full trottlr and take the fot of the pedal. so when i was out doing som unecessery driving it did misfire a little to hard (or what to say) so the part i have betven the airmeasurement and my 3" intake flap. i could move the car on the coldstart injektor( i have made a switch for it inside my car) so my part betwen did broke (had glued a plastic part on a rubber hose, did know that it wont last long) so i started thinking... I figured out that i can stitch the parts togheter with a ironband..

result

http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1714.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1715.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1716.jpg

and when the parts was put at place i had to go out and take it for a spinn.
this time i did find more truble, when i did give it full trottle it eont answer on the gas/trottle.
my 5" hose betwen my erlyer plastic part that broke and the airmeasurement did suck in when i was giwing full trottle, damn.

and again i´l have to think... i did shorten it of( its quite long)
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1719.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1720.jpg

the result of this was that the car started to give better response on the trottle. :) :)

i also did the front swaybars done

http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN1718.jpg
BTW i have a tribute song to my car http://www.youtube.com/watch?v=tKOVF1qwPzI looks the same(almost)

DNAsEqUeNcE
03-27-2011, 11:11 AM
interesting intake shenanigans. interesting concept overall!

BlueSwede
03-29-2011, 06:56 AM
interesting intake shenanigans. interesting concept overall!
Total intake shens...:-P reminds me of E.T. for some reason..
Maybe get better laminar flow if you ditch the windsock/hazmat tunnel.
Something more rigid?.
I can imagine that thing flexing all kinds @ fast WOT, making response time less than it could be, but then again its like HUGE!
it prob sounds rad when it is max inflated...like a mini lung, big breathes...

Using stock intake hole/tube in grill?under airdamn? NEEDS GIANT mesh covered hole in grill ....

ace_of_cloves
03-29-2011, 01:20 PM
Total intake shens...:-P reminds me of E.T. for some reason..
Maybe get better laminar flow if you ditch the windsock/hazmat tunnel.
Something more rigid?.
I can imagine that thing flexing all kinds @ fast WOT, making response time less than it could be, but then again its like HUGE!
it prob sounds rad when it is max inflated...like a mini lung, big breathes...

Using stock intake hole/tube in grill?under airdamn? NEEDS GIANT mesh covered hole in grill ....

wel it dont flex that much, its quite compresed alredy. totally the tube is almost 30".

yes i know its huge a shenanigan but i didnt calc. enything when i was welding the holder for the airmeasure or the intake, suddenly when i was mounting all together i notised my mistake :(
but it works :)

like i wrote earlyer i´m going to upgrade with megasquirt, thats why i have eight injektors

ace_of_cloves
03-31-2011, 05:19 PM
have to start with my rear bars to morrow to get it done some time.. :P

ace_of_cloves
04-14-2011, 03:19 PM
have today purchased a shorter belt .. had ordered an 2.0 ford OHC. but NO when I measured out the original and the ford had round tooth .. looked in the directory again and saw that the OHC 1.6 and 2.0 had different profiles, but I know it's the same. so then it was wrong in the directory.

after more looking we saw that lada 1300 had the belt i was looking for :)


the shorter belt is for my b230 projekt.

ace_of_cloves
04-18-2011, 04:18 PM
the car is now lower in the front and higher in the rear :-P

ace_of_cloves
09-18-2011, 08:19 AM
updates!
http://i175.photobucket.com/albums/w139/volvo_kalle/245/IMG_1202.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN28072a.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN2284.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN2338.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN2789-1.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN27901-1.jpg

i have thrown a way the CI-injektor **** and taken the stock carburator the Zenith :roll: also i had an issue withe the ather car i drive to work with so i had to take this one..
the lowest consumption ended up on 8,9liters/100km it is 2,35 gallons/62 miles

cookiemonster
09-18-2011, 01:59 PM
Whats up with your seats? they look interesting any pictures?

ace_of_cloves
09-18-2011, 02:27 PM
just som old "covers" from biltema in sweden they were black and the dors are blue so it didnt match :( but shore i can get a picture of the seats

ace_of_cloves
09-19-2011, 03:59 PM
here is a link from the old car(of mine) i did take them from.. its quite badly in shape now as you can se on the other pics.

and no it is´nt the same car just the same steringwheel, shiftnob and the paint

ace_of_cloves
09-19-2011, 03:59 PM
here is a link from the old car(of mine) i did take them from.. its quite badly in shape now as you can se on the other pics.
http://www.garaget.org/?car=15221&image=2099999

and no it is´nt the same car just the same steringwheel, shiftnob and the paint

240Joe
09-20-2011, 08:26 AM
Wow! What happened to the black 240? Were the people in it ok?

D.E
09-20-2011, 10:50 AM
I think that's his old car.

Jävlar vad tilltryckt den svarta var! Har inte sett bilderna förut, snacka om änglavakt! :omg: Fränt bygge det nuvarande iaf, gillar på något sätt att du inte bara smäller dit en turbo. Även om jag hellre sett en B23 i är det ju hårt att någon trimmar en gammal B19 också. ;-)

ace_of_cloves
09-20-2011, 05:00 PM
Wow! What happened to the black 240? Were the people in it ok?



well i realy don´t remember. 10 min befor and a week after the crasch i dont remember a thing..

:( sad

i was the only one in the car, with no seatbelt BUT just becouse i got Lucky dosen´t mean that YOU WILL HAVE while DON´T wearing one!!!

!!HOPE I `M CLEAR!!

sorry for the misspelling


WEAR YOURE SEATBELT

(bra att det finns de som snackar svenska här också)

ace_of_cloves
09-26-2011, 12:08 PM
it looks like i´m going for an other engine becouse the b19 i got now is blowing out oil from the vent. so there was the fun :)
going to put a b200 in instead. engine from the black

karlis m
09-30-2011, 04:39 AM
.

karlis m
09-30-2011, 04:40 AM
I wonder was there a special reason why you moved fuel filter etc from the back to front?

ace_of_cloves
10-01-2011, 08:10 AM
wel its most made by stupidity and lazynes :-P

I didn´t recykle al the parts from the black one with GLI and then when it was fitting time on the silver one so i didn´t either got all fitting details so i just fitted it over there

Finnish240
10-01-2011, 09:32 AM
OHHOH! Suomalaisia!

(OH! Finnish people) :lol:

Good looking project here!

ace_of_cloves
10-03-2011, 01:33 PM
bought a new key to my car.. from a -98 940 with immobilizer

http://i175.photobucket.com/albums/w139/volvo_kalle/rmnCHRxZf.jpg

ace_of_cloves
10-04-2011, 04:15 PM
photo shots

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN3074a.jpg

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN3070b.jpg

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN3063a.jpg

http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN28072a.jpg

Old Iron
10-04-2011, 07:37 PM
Ilove 240 wagons with out that ugly faded weather trim around the doors and I like the way your tailgate is de-baged!!

ace_of_cloves
11-22-2011, 01:46 PM
going slowly forward, BUT forward. the pistons are cleaned and the cylinders have to get gleaned up and leveled abaut 0,3mm.
and maybe im goinng to get 46mm intake valves and som epoxi for the head, maybe the epoxi.
just have to get my thumb out so i can order the skeletonflywheel from sweden.
then after that i have to be sure that evrything is in right weight and that :( quite a bit to go

ace_of_cloves
12-16-2011, 04:31 PM
have ordered the skeleton flywheel
http://i175.photobucket.com/albums/w139/volvo_kalle/vinter%2011/8-bult_1.jpg

gear whine
12-16-2011, 06:17 PM
how light is that flywheel?

was that all milled from a stock flat flywheel?

Ruben
12-17-2011, 05:03 AM
how light is that flywheel?

was that all milled from a stock flat flywheel?

Probably something like this: http://folkraceshop.se/skelett-svanghjul-volvo-8-bult?category_id=95

ace_of_cloves
12-17-2011, 09:46 AM
it's just that flywheel i've orded. it's weight is 4,7 Kg.

and it's made from a stock flatt flywheel.

ace_of_cloves
12-18-2011, 04:25 PM
new engine is going on
B200 that has 10:1 insted of B19 with 8,8:1
http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN3090.jpg

Two245Turbos
12-18-2011, 06:56 PM
Where can I get a header like that? Nice!

Josh
12-19-2011, 05:17 AM
http://www.kgtrimning.com/

Ruben
12-19-2011, 11:34 AM
Where can I get a header like that? Nice!

Mickegron
Folkraceshop
Timosmotor

ace_of_cloves
12-19-2011, 12:09 PM
that one is a JT-superflow but the manufacturer does not really matter and I wrapped it myself

ace_of_cloves
05-23-2012, 12:53 PM
UPDATE!!




http://i175.photobucket.com/albums/w139/volvo_kalle/245/2012-04-12191221.jpg

http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN3349.jpg

http://i175.photobucket.com/albums/w139/volvo_kalle/245/DSCN3348.jpg






i think the 46mm valves are to big.
http://i175.photobucket.com/albums/w139/volvo_kalle/245/2012-04-12192249.jpg


i´ll think i take the one to the right (B234)

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN3086.jpg






bonus pic of my new car
http://i175.photobucket.com/albums/w139/volvo_kalle/sommar%2012/DSCN3341a.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/sommar%2012/DSCN33301.jpg

YLD244
05-24-2012, 01:16 AM
wow really enjoy reading this build.
the new engine should be a big revver ay?
maybe some lighter H beam rods would be good for high rpm?

ace_of_cloves
05-24-2012, 04:56 PM
wel i started thinking about the high rpm and planing not to aim that high.

Hemily
05-25-2012, 07:40 AM
B200? is it anything like the B200K engine? my first 240 had that engine :P
it was an automatic with a manual swap... so it had the gearing on the diff... from an auto, and carb from a B21 :P
The diff made it an interesting car, it accelerated from people with B23 or even B230, however.. top speed... none existent XD

I do admit... i miss having an older 240, my current one is a 1991, it just feels so different from the '85 i used to have.

500dollar744ti
05-25-2012, 09:16 AM
i always like how the people who want n/a performance just do it first then post about it.

everyone else posts about n/a performance, then never does anything.

nice work friend.

ace_of_cloves
05-26-2012, 03:36 PM
B200E/A/K/F there almoust the same. this one is a b200k but from the begining the engine was ment to be a B200E from an old car of mine.


This one.


http://i175.photobucket.com/albums/w139/volvo_kalle/162970_134951249899912_100001551131315_198433_5050 107_n.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/IMG_1670.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/162833_133780156683688_100001551131315_192340_3482 826_n.jpg
http://i175.photobucket.com/albums/w139/volvo_kalle/IMG_1669.jpg




oh my god what i miss this car





but an bearing was finito to the middle axel so i did take this one in stead

ace_of_cloves
05-26-2012, 08:38 PM
i always like how the people who want n/a performance just do it first then post about it.

everyone else posts about n/a performance, then never does anything.

nice work friend.

well i havent done enything yet. i´ve bought all the paces and thats it. just the mounting left.







and sorry for my bad english

ace_of_cloves
06-09-2012, 03:26 PM
i´ll have to start do somting now. haven´t done enything for a while..


feel so ashamed

ace_of_cloves
07-01-2012, 05:56 AM
started puting some peaces togheter..

it still goes slowly forward

ace_of_cloves
08-02-2012, 04:53 PM
assembled the pistons and bearings today. more up tomorrow

spourcyrous
08-02-2012, 05:09 PM
Nice thread! BTW, that is pretty ****ing insane that you lived after the accident with your 244.

ace_of_cloves
08-03-2012, 01:32 PM
Nice thread! BTW, that is pretty ****ing insane that you lived after the accident with your 244.

come oon, it dosent look so bad, or does it?

well im telling they who ask that i had an angel on my sholder that night.

ace_of_cloves
06-03-2013, 01:20 PM
http://i175.photobucket.com/albums/w139/volvo_kalle/2013-04-14134358_zpsc77e3720.jpg (http://s175.photobucket.com/user/volvo_kalle/media/2013-04-14134358_zpsc77e3720.jpg.html)

B19
http://i175.photobucket.com/albums/w139/volvo_kalle/2013-04-13182226_zpsa7b962c3.jpg (http://s175.photobucket.com/user/volvo_kalle/media/2013-04-13182226_zpsa7b962c3.jpg.html)

B200
http://i175.photobucket.com/albums/w139/volvo_kalle/2013-04-13182240_zpsa4d51812.jpg (http://s175.photobucket.com/user/volvo_kalle/media/2013-04-13182240_zpsa4d51812.jpg.html)

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN4733_zpse353e680.jpg (http://s175.photobucket.com/user/volvo_kalle/media/DSCN4733_zpse353e680.jpg.html)
http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN4735_zpsfddab232.jpg (http://s175.photobucket.com/user/volvo_kalle/media/DSCN4735_zpsfddab232.jpg.html)

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN4738_zps5907ac4f.jpg (http://s175.photobucket.com/user/volvo_kalle/media/DSCN4738_zps5907ac4f.jpg.html)

http://i175.photobucket.com/albums/w139/volvo_kalle/DSCN4739_zps93f7a806.jpg (http://s175.photobucket.com/user/volvo_kalle/media/DSCN4739_zps93f7a806.jpg.html)

ace_of_cloves
06-08-2013, 12:30 PM
Up and running with B200.
The lighter Flywheel was totaly worth it.

I think i 'm goinig for MS this semester.