PDA

View Full Version : short shift for the m-46

reeferman
09-13-2004, 12:59 AM
http://home.comcast.net/~sunsetref2/DSC03501.JPG
this is for the new guys
i know this is a old idea but its the first one i made.
i made it for a freind and took about 1/2 hour.all you have to do is add a 1/2 inch to the bottom.he has his o/d switch on his dash so we cut 2"off the top.works great.

tony

you dont have to move the o/d
swedespeed740ti
09-13-2004, 07:12 AM
what about the reverse?
reeferman
09-13-2004, 11:13 AM
what about the reverse?
reverse is locked out above the ball joint.
on his we removed the lockout(not a good idea)
if you dont cut off the top reverse lockout works fine.

tony
hockey930
09-13-2004, 01:12 PM
you selling them?
Eamonn
reeferman
09-13-2004, 03:37 PM
you selling them?
Eamonn

no sorry just find a welder and a 1/2" bolt.

tony
Roguls
09-13-2004, 05:17 PM
If that is for a 740 it will not work. Dale did one for me that was 3/8" longer and it still rubs a bit; I had to modify the arm that holds the shifter.
Blackbrick
09-13-2004, 05:39 PM
I made one for my 85, very simple to do. Of course I don't think the tranny is going to last long enough to enjoy it for any lenght of time.
reeferman
09-13-2004, 07:14 PM
sorry should have said it was for a 2xx
245gti
09-13-2004, 08:53 PM
no sorry just find a welder and a 1/2" bolt.

tony

Easier said than done in alot of cases. Probably the reason I sell one once in a while.... :-P
reeferman
09-13-2004, 09:06 PM
Easier said than done in alot of cases. Probably the reason I sell one once in a while.... :-P

how much do you sell them for ?

so i can undercut your price.

just kidding i got 2 PMs that wanted me to make some .

now they know who to call 245gti

tony
245gti
09-13-2004, 09:21 PM
Yup...send them on to me. I'll look after them....

volvo245gti@shaw.ca if they want to email me....

Thanks
Morley
09-14-2004, 04:30 AM
this is for the new guys
i know this is a old idea but its the first one i made.
i made it for a freind and took about 1/2 hour.all you have to do is add a 1/2 inch to the bottom.he has his o/d switch on his dash so we cut 2"off the top.works great.

tony

you dont have to move the o/d

Or get a sequential-shift-kit from Sellholm Tuning in Sweden, or do as me, get an old Grp.A dogleg 5-speed tranny which is already shortshifted :-D