Mopar Blow off valve Conversion pic request

[Snow_K2]

Any one using the Mopar blow off valve conversion, if so. Can Anybody post a picture of it since im thinking about intalling it. i just want to see how it fits and looks. Thanks

[towerymt]

http://forums.turbobricks.com/showthread.php?t=25594

Email Lloyd (riseosiris) and see if he has pictures yet.

[jao]

Any one using the Mopar blow off valve conversion, if so. Can Anybody post a picture of it since im thinking about intalling it. i just want to see how it fits and looks. Thanks

are you talking about the valve in the airbox of turbo II mopars? if so i have. works, alittle on the small side. i've run my car up to ~22psi many times and it seems to work fine. i have just alittle compressor surge when using it over ~18 but like i said it is kinda small.

no pictures for you. on my car i do not use an idle control motor [megasquirted]. i used that nipple on the intercooler pipe and a shot piece of hose to connect them.

on jeremy's car i used one of the SAAB valves and fiberglassed it to the pipe. been over 15psi and still holds fine.

HTH

[Snow_K2]

im talking about the mopar conversion that goes with the stock BOV and instead of putting the air back into the box or intake it just vents it. I belive it goes between the turbo and the stock BOV.

[Hank Scorpio]

ya the SRT4/MOPAR add on. Pat G uses it, sounds great. Seems to work ok.