PDA

View Full Version : Crane Hi6-S+PS60 Coil install (a bit messy)


MikeHardy
11-15-2004, 12:52 PM
yes it's messy, i need to get some terminal blocks to tidy up the input section. but it's running and very smoothly i might add. Triggering is provided by a Pertronix ignitor in place of the stock points system

http://www.pbase.com/ravennexus/image/36382885/large.jpg

the poi
11-15-2004, 01:30 PM
Delicious. But yes, buy seom damn wire ties.

MikeHardy
11-15-2004, 01:33 PM
yeah it was kinda put in on the spur. i was sat here bored and thought aaa **** why not

Volvo Dan
11-15-2004, 02:16 PM
Cool, that's how I often do it, get it to work first then make it pretty....

MikeHardy
11-15-2004, 02:55 PM
good thing is, it's theHI-6S designed for turbo use and has a map sensor plug for boost retard and a stage limiter too. so when i go turbo with MS or carb i can just leave the spark as it is for the time being