B230 intake with B21 TB

[DaRiceRipper]

I printed out all the info on the b230 intake manifold swap and plan on doing it this weekend.
But i know a couple of you guys are using the b21ft TB with the b230 intake.
I was wondering if thier was a write up on what i would need and how to do this using the B21 TB.
thanks guys

[Hank Scorpio]

Sure its pretty easy:

You'll need the b230TB throttle link though (the one on the TB).

You can also just leave the cold start injector in the TB, theres enough hose there (if you free it from the rest) to make it reach.

Bolt it on (derr)
Use the b230's throttle link, just slides over the b21, BUT you'll need to take the b21 throttle link, and grind off everything but the little tab that touches the TPS. Then slide the b230 link over that (so you can connect it to the throttle cable) and thats it!

Now, Pat had to trim his hose a bit, mine seemed to go on after a couple tries. But thats all you have to do!

Doug