MS Related Wiring Question

[Brickster151]

I'm finishing the MS install on the 244, and for the last touches I'm wiring up stuff from the stock wiring harness on the right hand side of the engine bay to the components [to the starter, alternator, coolant temp gauge on cluster, etc].

Does anyone have the pinout for what pin does what as well as the colors for that connector on a 83' 240 Turbo? I remember seeing a post on it a while back but I could not find it.

Thanks!

[wildmanben]

The yellow/blue wire is the starter signal. I think there's a black one for the oil pressure sender. The starter one is the only one I know for sure off the top of my head though.

[Unregistered]

brown goes to starter then coil
red alternator
blue 12v+
green oil pressure
black oil pressure
yellow/blue starter
yellow coolant temp

These are my notes before I tore down my 82 242 for its megasquirt install.
hope they help!

[vthreat]

sorry that was me btw, new laptop for MS doesn't log me in automatically. :roll:
it does now though!