TheOtherDoug
08-16-2005, 01:04 AM
Real Progress with all the problems I had been having..
Make for damn sure that you have your wideband set up correctly in the megatune config file. I.E If you have a plx make sure you set the line for the AFR gauge to
afr = 10.0+ 0.039216 * egoADC
Then the gauge in megatune will read correctly!!!! Damn stupid that i missed that the first hundred times around. You should check this for your specific application, it might help!?
2. When you use MsLogViewer, Again make sure that it is set correctly for YOUR wideband...lol. for the PLX use 0v=10afr, 5v=20afr, Dont use the innovative settings like I incorrectly read somewhere...blah
3. My datalog: Looks slightly better me thinks!!!
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTAzNTE2NjZzNDEzZGZkMzF5NTQx.jpg
Make for damn sure that you have your wideband set up correctly in the megatune config file. I.E If you have a plx make sure you set the line for the AFR gauge to
afr = 10.0+ 0.039216 * egoADC
Then the gauge in megatune will read correctly!!!! Damn stupid that i missed that the first hundred times around. You should check this for your specific application, it might help!?
2. When you use MsLogViewer, Again make sure that it is set correctly for YOUR wideband...lol. for the PLX use 0v=10afr, 5v=20afr, Dont use the innovative settings like I incorrectly read somewhere...blah
3. My datalog: Looks slightly better me thinks!!!
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTAzNTE2NjZzNDEzZGZkMzF5NTQx.jpg