MS install

[ichibon]

Looking for someone near Eugene, Oregon familar with setting up MS on a 245 ti, its an 83. I have the MS kit but have never gotten around to assembling it. also have the stim kit. I am ready to do change over, but as this is my daily driver, I can't have it down for to long, so need someone to help that has experience with this.

[benflynn]

plan plan plan...build it and make a new harness...read everything here and on the ms site...plan for everything possible...it took us 29hours to install mine....we ran into a couple of probs. that doubled our time...are you doing ms or msns? just work everything out before you start and chek you wire colors on your car to make sure they match up..it might be easier to just do fuel since you can use the kjet ign as a stand alone...once it is right it will be reliable..good luck

[kyle242gt]

:werd: what he said. You really want to do this yourself, since you will have a better understanding of how it works once it's all together.

Come on in, the water's fine :-D

[yozsi]

took me 3 hours to get mine in and running well. if i can do it, you can.

[medfurd]

I'll be a frosh at U of O this fall and I have some MS experience. We can hang some time.

[dbh86]

dive in over your head, you can wire up most of the MS while LH is still installed

[swedefiend]

dive in over your head, you can wire up most of the MS while LH is still installed

It isn't LH...

My k-jet install only took a day (8 or so hours), but there was a good week of prepping the parts and building the efi harness before I got started.

[ichibon]

Thanks for all the replys, gonna try to do it myself. Nice to know help is available, though.