PDA

View Full Version : Looking for a cone intake...Help


Vol242vo
09-12-2005, 02:21 PM
What kind of cone filter do must of you use out there on a B21F? K&N?

Inc3pt
09-12-2005, 02:24 PM
B21F? Would that be the 78 in your sig? Because if it is, thats a K-jet car and you cant use a cone filter.

Geoff240Ti
09-12-2005, 02:31 PM
You can't use a cone filter on a B21FT since the filter is inside the fuel distributor/intake housing.

...But since it's non turbo you should be able to use a cone filter no prob!
I'd just check to see what size that plastic pipe is and find a cone filter on ebay with the same diameter. Then measure up to see how much clearance you have with the airbox out.

For my 244 I bought a K&N for a jeep off ebay for $25 brand new pre-oiled.
I just kinda shoved it in a spot. For your car I'd do something similar, only picture it on the other side!
http://album3.snapandshare.com/23/13422/245069.jpg

:e-shrug: Works for me anyway!

stylngle2003
09-12-2005, 02:34 PM
i think NA Kjet cars existed until 1982

isaac
09-12-2005, 02:35 PM
He said B21F, so yes he can use a cone filter, and damn near any one he wants for that matter.

Just go by the auto parts store and start opening K&N boxes until you find one you like and hook it up to a dryer duct or something.

Vol242vo
09-12-2005, 11:25 PM
Sounds good! Thanks for all the advice... Sounds like I should go with K&N.

Vol242vo
09-12-2005, 11:30 PM
http://album3.snapandshare.com/23/13422/245069.jpg




So I take it you no longer use your windshield washing fluid...? I don't...I took it all apart and put a plastic cap on the rubber hose that the fluid flows through, to when I pull it, it gets the people next to me! Loads of funs!