PDA

View Full Version : b21ft CTS


Lord_Athlon
09-25-2005, 04:06 PM
Is there a single sensor on a b21ft that would be suitable for ms. I finally redid my entire harness and im getting ready to drop the ms one in, so i was wondering if i have to go buy a gm cts or if i can get one of these to work

The Aspirator
09-25-2005, 06:03 PM
You need a sensor with a fuel injector style plug, if you have one of those then yes you can use it. If you don't have one, you can either get the GM one or a volvo one, but they *might* not thread into your head so you may have to get creative with an adapter....

malloy1
09-25-2005, 07:22 PM
http://www2.autopartsauthority.com/parts/autopartsauthority/quote.jsp?year=1992&product=C5053-13390&application=000482232&part=Water%20Temp.%20Sensor&category=C&dp=null

I think it's a 14mm X 1.5 Pitch.

I had to use one in my '79 B21F engine because there was only 2 holes in the head. One was for the temperature sensor for the temp gauge, and the other was the Thermo Time Switch.

Paul

adrianpike
09-25-2005, 07:27 PM
http://www2.autopartsauthority.com/parts/autopartsauthority/quote.jsp?year=1992&product=C5053-13390&application=000482232&part=Water%20Temp.%20Sensor&category=C&dp=null

I think it's a 14mm X 1.5 Pitch.

I had to use one in my '79 B21F engine because there was only 2 holes in the head. One was for the temperature sensor for the temp gauge, and the other was the Thermo Time Switch.

Paul

+1. I'm using this same sensor, works great!