View Full Version : How do i wire a heated O2 sensor with MS?
10-09-2005, 12:28 PM
I would like to wire my O2 sensor so that it heats when the FP is running. do I just put the power wire from the sensor to the Fp terminal and get a higher amp fuse?
10-09-2005, 01:34 PM
Sounds right. Make sure you still have D11 in place on the MS board just in case you foul it up. You do realize that a NB sensor is basically useless for tuning, right? If by chance you've missed the resounding refrain in nearly every MS thread, a WBo2 is the best $200 you'll ever spend for tuning.
10-09-2005, 01:43 PM
I do have D11 soldered in my MS board, wasn't aware that you were supposed to take it out... been driving withit in for a few days.
So two wires coming from the Fp terminal, one to the FP and one to the O2 sensor, and what fuse? It's a ten amp fuse now(without the sensor)- so maybe a 15 or 20 amp fuse for both the FP and sensor?
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.