Anyone have 3'' exhaust pics on IRS car?

[Jono780]

Just wondering if anyone has some pics from under their car of a 2.5 or 3'' custom exhaust on an IRS car. Looking to get it done to my 780, so just want some ideas of how it should or will look. Thanks

[thelostartof]

i posted pics of when i did it on a local car .. i am doing another one soon and can get more pics then ...

but its simple as pie up untill you make that very LAST bend over the rear subframe as i built a perfect over the axle pipe .. but that last bend i made didn't allow it to slide in there as one piece so i had to cut and weld it on the car which sucked but eh ...

use an oval offset muffler for the rear and if you want a resonator get a small/short bullet muffler

[Jono780]

Yeah I was kinda concerned about going up and over lol

[thelostartof]

its all easy as pipe makeing that first bend up .. and then the bend going back .. and then that bend going down is what kicks ya in the nuts
so get some slip fit pipe and use a U bolt clamp there .. as i tryed doing it w/ a 3 bolt flange and the flange made it to big to fit .. so w/o removing the rear subframe off the body you either weld it on the car or makeit slip fit @ that rear part ...


haha when i build that 780 local exhaust want me to make a 2nd copy of it for you? haha


but yet let me find thosepics and upload them for ya

[DerSnart]

When I did mine (I'll see if I can dig some pics up for ya) I put a 3" 3-bolt flange (from atpturbo.com) sorta at the "top" of the over axle part, works great!

[Jono780]

Im actually tempted to get you to make me a second lol. Yeah, let see the pics!

[thelostartof]

i looked for liek 30 mins .. can't find them i know i have them just didn't see them on my drive nor my server so i don't know ... haha we'll see what i can come up w/ but its easy ... 45 up .. 45 to make it straight .. add in like 12 inches of pipe to go the other side of the frame and then another 45 down and so on .. really simple

[the poi]

mkIi was simple to do...

[thelostartof]

says the man who forgot how to weld

[edicius]

just make it exit at the rear wheel, screw going over the axle...