Not quite starting...

[bryant]

Installing MS 2.2 fuel only on my B20f (1971 142e).

When I hit the key it fires right away as if it were going to start right up.
never seems to run mor than 5 or 10 seconds.

Plugs seem to get wet right away. even if I set the priming pulse to 0 it seems to be waaay rich? req fuel is 7.6.

[bryant]

At last, it started.
had to turn off all enrichments and turn the req fuel down to 2.8!

then it started and slowly came to life, burning off a LOT of excess fuel.
and now it is smoothing out and idling about 1000

Can't figure out why the req fuel is so low but at least it is running and it revs like crazy!