AFR targets for VEXME

[fryea]

Howdy again

Finally getting down to finer tuning now that i know the car starts and runs mostly reliably. I've got about 200 miles on my MS setup thus far. Now i need to make sure i dont blow it up or burn any valves and save some gas with some nicer tables

What do your vexme afr tables look like?

[kyle242gt]

I think a search for "target afr" will turn up a lengthy discussion. I run 14.7 at idle, 16 up to 90kpa, 15 at 100, 13 at 120, 12.5 at 200. I run richer at low rpm to prevent pinging, I had to make that adjustment when I swapped in the T cam.