PDA

View Full Version : SCCA Autocross - 9/14/03 - FedEx Field (MD)

towerymt
08-21-2003, 01:14 PM
The next DC region SCCA Solo II event is Sunday, September 14th at FedEx Field in Landover, MD.

Preregistration is required at this link (opens Sun. Aug. 24th @8pm.):

http://www.autocrossers.com/cgi-bin/WDCR6.pl


Prepayment is required, $25 for SCCA members or $30 otherwise.


Lineup and payment status can be seen here:

http://www.autocrossers.com/cgi-bin/WDCR6_lineup.pl
TerribleOne
08-21-2003, 01:21 PM
:eek: man, I wish I was still in Virginia, I'd drive up to Md in a heartbeat.
blkaplan
08-21-2003, 02:04 PM
ill be there in my 242 turbo
mikep
08-21-2003, 08:58 PM
I will either be in the wagon or Patches, if the thing is together and painted, and the trailer is finished and tagged. Better say the wagon. Maybe I will borrow Kumhos.
blkaplan
08-25-2003, 08:59 AM
signedup in the 242 for GS in the afternoon. Hopefully i can get my hoosiers mounted by then
mikep
08-25-2003, 06:13 PM
I scored loaner Kumhos for the wagon.
And my sister is driving up from Richmond to codrive.
towerymt
08-29-2003, 01:26 AM
Hey Mike, could you drag that B21 block up to the sept. 14th event? I might be picking up a set of tires at the same time, so I may as well do it all at once. Thanks.
mikep
08-29-2003, 10:52 AM
sure.
Need anything else?
blkaplan
08-29-2003, 02:04 PM
yeah, could you bring me a dif and install it there
:rofl:
seriously
towerymt
08-29-2003, 07:39 PM
sure.
Need anything else?

Got a crank & rods from a B21/23? I'll pay you something for the parts, or at least buy you lunch. I could use an oil pan too. :wink:

BTW, have you got a SA90/M90 helmet to use? Just a reminder in case you forgot.
mikep
08-29-2003, 08:48 PM
I happen to have a forged crank and a set of rods. All B21, all cleaned, pistons still attached. I can mag the crank, if you want. It has not been raced.
I also have an oil pan that has been cooked. Do you want baffles with that? Cracked 531 head?
BTW, I have several complete B230s, still running, if you want to build an engine completely and keep yours intact. That's what I did, used a B230 upper and B23 lower, still have my old complete engine.

I bought an open-face Snell M2000 helmet today for $70, fits nicely. Thanks for the reminder anyway.
mikep
09-08-2003, 05:34 PM
I forgot to mail my payment, so I dropped it in the slot inside the Salisbury PO Saturday evening.
Today I am marked paid.
It is like the Twilight Zone.
My sister sent her check on Wed. and is marked unpaid, and she works for the Post Office in Chester, VA.
mikep
09-15-2003, 08:12 PM
Here I am waving to the crowd after blowing my run by looking at the red light on the dash, *Note* the right front tire is folding under nicely.
<img src=http://www.pbase.com/image/21382203.jpg>

Ben's ex-tire
<img src=http://www.pbase.com/image/21382232.jpg>
towerymt
09-18-2003, 12:34 AM
Results:

http://solo.wdcr-scca.org/results/2003/091403.htm

Mike, I like how you have the wipers swinging towards the apex. Helps the weight distribution, right? :wink:

I PAX'd 71 out of 220!!!!!!
mikep
09-18-2003, 01:10 PM
Results:

http://solo.wdcr-scca.org/results/2003/091403.htm

Mike, I like how you have the wipers swinging towards the apex. Helps the weight distribution, right? :wink:

I PAX'd 71 out of 220!!!!!!

A pox on your pax.

I am working on a motorized sliding rear seat that automatically distributes weight. You may have noticed that I invited a wide variety of "ballast" to the event.