IPD Sport Springs

[1984Turbo242]

Hey everybody; hopefully I'm going to be heading down to Portland, OR, soon to get a 1982 242 Turbo. Coincidentally, Portland is the home of IPD :x: ; I had been looking on the IPD website and I saw the sport springs, I'm not sure If I would like the way they look or not. So if anybody has a Brick with IPD Sport Springs, it would be awesome if you could attach a picture of your car, or email me one... Ubercrunk@hotmail.com .

Thanks a lot guys!

Ian Barrere

[z537z]

I'd guess that hundreds of people here have IPD springs in their cars. The difference isn't immediately noticeable, they don't lower TOO much.

Check out this forum to see a bunch of cars, specs are often listed underneath them. And for reference, Jamex, etc. springs look about the same as IPDs.

http://forums.turbobricks.com/viewtopic.php?t=5718

Noah Blum is the first example coming to mind
http://www.pbase.com/noah240t

Good luck, welcome to the board

_z

[dbarton]

Here ya go...
Dave B.
<img src=http://www.linkline.com/personal/dbarton/images/80-242DL.JPG>

[norcal dual745ti]

I'd guess that hundreds of people here have IPD springs in their cars. The difference isn't immediately noticeable, they don't lower TOO much.

Check out this forum to see a bunch of cars, specs are often listed underneath them. And for reference, Jamex, etc. springs look about the same as IPDs.

http://forums.turbobricks.com/viewtopic.php?t=5718

Noah Blum is the first example coming to mind
http://www.pbase.com/noah240t

Good luck, welcome to the board

_z

I think noah cut his ipd springs a coil or so...

[lilpaz]

And Jamex springs tend to lower the car alot more than iPd's. But there is an issue about their consistency...

[Two245Turbos]

http://www.slackersunion.org/gallery/incoming/media/Dsc01445.jpg

[hardattack]

IPD Springs
http://hardattack.home.comcast.net/drfront.jpg