Want 17" wheels for my 780

[dallas780]

Hi All! I've been unsuccsessful in finding 17" wheels for my 780 Bertone Coupe. The problem is the offset (20mm). My question is will the stock wheels from the S or C series fit (expensive I know) and is there an aftermarket supplier that anybody can reference me to?

Thanks,
Eric.

[Spottty]

My buddy at tunerworks.com can order just about any rim in a blank which means he can probly get a 20mm offset and just get it drilled for the 5x108 (I think thats the size)

Most shops should be able to do this if they are good. The drilling is about $100 I think.

Or, you could check out Mas Italy wheels, I think they have the right offset.

Or, just buy spacers :)

[WeezilUSA]

The front wheel drive rims will require spacers...

Hi All! I've been unsuccsessful in finding 17" wheels for my 780 Bertone Coupe. The problem is the offset (20mm). My question is will the stock wheels from the S or C series fit (expensive I know) and is there an aftermarket supplier that anybody can reference me to?

Eric,

I ordered my C5CR wheels from Panasport:
Panasport C5CR (http://www.panasport.com/c5cr.html)

You can see the specs and some picts on my site here:
Simon's suspension & wheels (http://simon.dodd.home.comcast.net/volv8/suspension/index.htm)

They Wheels were custom ordered with the correct offset and bolt pattern. Total cost, shipped to me was ~$1200.

take care,
simon

[Anonymous]

Try Team Dynamics they have a few wheels that are direct fit for about $149. + us, and up each. Their direct fit for Volvo RWD are sized from 15" up to 18".

"ProRace series" proper off set, 17"x7" can be had primed, then you can paint them to match your 780. Very, strong and light weight too weighing in at about what the Volvo 780 15" alum wheel does. Their rally series cost more but can stand up to extreme off road rally stress, many professional teams use em.

[drrock]

Hi All! I've been unsuccsessful in finding 17" wheels for my 780 Bertone Coupe. The problem is the offset (20mm). My question is will the stock wheels from the S or C series fit (expensive I know) and is there an aftermarket supplier that anybody can reference me to?

Thanks,
Eric.

IPD makes a nice correct offset wheel by voxx Largest size 16" for the 700 series. Adapters are expensive for the correct machined offset using late model volvo wheels. Gil Racing Inc makes custom spacers. $300-$400... Maybe someone out there has a cheaper solution.

[PWRPUFF]

Holy thread resurrection, Batman!

-- Kane ... it's only been over two years. The original poster prolly resolved the issue already.

[Tha VZA]

[QUOTE=Spottty]My buddy at tunerworks.com...QUOTE]

you mean tunerworks in Calgary...that tunerworks?? a buddy??

PM'd!!!

ciao

[Chigga 744SE]

somebody waited 2yrs to do this?