quinn_volvo
02-19-2007, 03:56 PM
Trying to figure out how to do my nitrous control.
I could use the eboost 2 auxilary output to power the nitrous solenoid & program nitrous to come on between two setpoint values (boost or rpm).
I prefer not to do it this way because it's either rpm or boost, not a correlation.
On to the topic:
I want to control off of the tps value. say 90% - nitrous on
how does nitrous control work in msII, I searched the megaforums, but didn't really find anything useful.
How to do it? I figure it's similar to boost control, just a different set of codes. IDK.
MSII V3 board
If all else fails I could put on the microswitch.... (blah)
Thanks,
Lee
I could use the eboost 2 auxilary output to power the nitrous solenoid & program nitrous to come on between two setpoint values (boost or rpm).
I prefer not to do it this way because it's either rpm or boost, not a correlation.
On to the topic:
I want to control off of the tps value. say 90% - nitrous on
how does nitrous control work in msII, I searched the megaforums, but didn't really find anything useful.
How to do it? I figure it's similar to boost control, just a different set of codes. IDK.
MSII V3 board
If all else fails I could put on the microswitch.... (blah)
Thanks,
Lee