did a search came up empty, msd 6a box on my b230ft. how to install it? diagrams?

[CTP_hookz]

like the title says, i checked the search feature and either i suck at it, or people are keeping thsi a secret.

i have a msd coil on my b230ft now i also just got a msd 6a box. how do i hook this bish up.


thanks in advance guys.

[740ATL]

edit... NM... I read this and for some reason thought MS. nothing to see here.... carry on.

[qwkswede]

You just have to feed the red/white coil trigger wire to the msd box. And then the msd output wire to the coil. Then I think there are a couple 12v positive and a ground for the msd box itself that you route to battery/ignition switch.

If you have a chilton or haynes manual for a 700 series they have the ignition system wiring diagrams. I tapped into all the necessary wires near the igniter on the passenger side fender. I kept the igniter in place, and just used the output side of it to signal the MSD box. This is the red/white wire that usually just runs to the coil.