Internal plumbing of a dual-input FPR?

[pwschuh]

Does anyone know how a dual-input FPR (Aeromotive, Malpassi, etc.) is internally plumbed? These things have an input port on each side and the return outlet on the bottom. If you are only using one input, can you use the other input port for a fuel pressure gauge fitting (i.e. does it see system pressure coming from the other side)?? Thanks.

[frpe82]

Does anyone know how a dual-input FPR (Aeromotive, Malpassi, etc.) is internally plumbed? These things have an input port on each side and the return outlet on the bottom. If you are only using one input, can you use the other input port for a fuel pressure gauge fitting (i.e. does it see system pressure coming from the other side)?? Thanks.
Yes. That is what I did (I had a Malpassi with two side fittings and one bottom fitting just like you described).