Recent content by Texas240

Holding this spot when I can get away from being a dad and allowed into the shop for more than a few hours between furniture projects. But But But But....... It involves a 2016 L83 motor with 35K on the clock, Mustang II front suspension, 2001 Corvette rear assembly w/ torque tube, 4l60e...

In search of a switch that was a drop in replacement that didn't involve drilling new mounting holes or enlarging the whole that the spade connectors came through was a few years and poor search skills. In getting the car back to all working order so its ready to forever the next owner might be...

Some 7-8 years ago in my younger and dumber days I removed abs thinking it was cool to not have it. (car is a 93 factory abs. G80 locker) Im working on gathering the rest of the parts needed to stick a C4 rear end in the wagon in the following months or year or at some point and the rear end...

Has anyone found a replacement in a softer rubber or poly than what sts offers in their mounts? I made a good amount of difference going with a higher stall converter in my 4l60e but there mounts and the poly that is offered still translates a good amount of vibration at idle through the the...

Its been some years and I cant remember how people are running a 5" spring with Bens Spherical Strut Mounts. How? Edit: Ive been corrected that a stock spring is around 4"+ by ben. I also found what I was looking for on google images.

How does one change the mileage on a electronic 240 speedo. I have the K39xxx matte black speedo

Ive been battling pedal feel issues for a few years now since I've put the brakes on. The first motion of the pedal I have nothing, maybe a little braking then I start to get braking. I get full brakes at the very end of the pedal movement. Ive tried a few different known good boosters, tested...

Anybody know what the pulses per minute on the 240 electronic speedo is coming from the rear end? Swapping rear ends that does not have a sensor in the rear end and I'll be going off of the VSS sensor in my 4L60e.

The truck converter that came with my 5.3 is way to tight for my setup. Im getting tired of driving through my brakes at speeds slower then 0-15mph. Who is using who? I have a LSA supercharger and a C4 rear end going in soon. Looking for something streetable and in a decent price range.

Im in the market for a used open trailer. Roughly 6'x10-12' and I really want to know what the 240 1-1/4" trailer hitch is really good for. it says 3500lbs but is it the trailer or the bolts that are going to go first?

I turn 30 tomorrow, september 23rd and I needed to give myself something. To the dyno I go. Car for once is actually completely ready by a date set in motion. A friend on here who lives in the DFW area mention a tuner, Calibrated by Karger who only tunes LSx engine and has done a few Lsx Volvos...

First off. I know some of you purist are going to tell me not and I should only stick to what came in the car blablabla and that some of yo are going to moan and ground and grunt that its dangerous cause its a highly flammable blablabla. If I didn't have three cans of duracool and a can of...

V8 guys, what sensors are you using to work with the stock +90 240 gauge in the stock 12mm x 1.5mm hole in the Lsx heads? Can't seem to find any sensors that fit the 12mm thread and have the same ohm reading as the 240 gauge. I'm open to ideas other then splicing in a T tube in the radiator...

93 240: Running MS, MS wiring. Ignition Switch is stock and so is wiring. Using the 12v wire that use to turn on LH2.4 Fuel pump and computers to turn on a single relay and MS. The issue: Car won't always turn over. When you go to crank the car with the key all dash lights dim very heavily. I...

I know some one posted a week ago or so a Swedish company that sold the ring gear for a roadblock flywheel. Google and TB search yielded nothing. So, any ideas?