• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

R
Reaction score
0

Profile posts Latest activity Postings About

  • Hi Seb,

    My IPD cam work very well retarded 2 deg. It have a good low end torque, and pulls srtong from 4200 to 6500+ RPM.

    But if you're searching for a hi torquey cam, have a look at the KG2T cam... It'll be my next cam also!

    And I've meet this week end HansW and tried his car...It's running with a 531 head and the "V"cam straight up, and it run well also.

    If you're interrestsd, I've a "V" cam for sale...

    Let me know...

    Greetings from Switzerland,

    Alex.
    Hi Roy,
    once, I talked about the M-Cam in the 531 head. This experiment is closed now.
    I think, I think the only way to go is with the v cam about 4 degrees advance but not more. Otherwise the exhaust valve will close for TDC...so reversion is to big maybe.
    The V-cam is not balanced with the 531 head. With the 530 head it pulls better at low end.
    Advancing or retarding it makes no gains at all (I think) because i drove it with different settings...but It I did not meet a good result.
    I do not no exactly, but I think its not bad having an overlap of about 20 degrees (with 020" open valve)
    so I will look for a pretty strong cam!


    Tell me how your IPD will work...

    Greetings from Germany
    Sebastian
  • Loading…
  • Loading…
  • Loading…
Back
Top