• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Stereophile33
Reaction score
0

Profile posts Latest activity Postings About

  • I read an old post saying you build whiteblock adapter plates, still making these? I'm down in salem and really need a answer to my project. (971) 218-7616 -Josh please give me a call when you get a chance
    Hi was reading an OLD post from you regards to mounts for a B23et into a 140 series volvo. Can you give me any information on these please?

    Scott.
    Hello Jonathan,

    I read you have built B20 engines using a roller camshaft
    Was it the AGAP -cam ?
    I am also considering to use such a cam, but would like to know which experience others have using this type of cam.
    As far as I heard the lifter bores need to be sleeved to avoid lifter wear, and the axial cam travel needs to be completely eliminated using a bearing.
    Any tips/tricks, experiences would be greatly appreciated

    B.R

    Stefan
    Jonathan, I'm having a problem with RSI pistons I need help with. Cannot reach anyone at R-Sport. My email is paulmcurran@gmail.com, my phone is 413-478-1275. Please contact. Thanks, Paul
    Hi, I saw that you are working on a round tooth adj. cam gear? If so, any idea when they will be available? I was just about to buy a square tooth one & change all the gears, but I'd rather keep the round setup. Let me know. Thanks, Paul
    Hi Jonathan, I'm after a set of pistons and maybe rods for my 8v B230 turbo. I'm in Australia, what would P&H cost me? Cheers
    Hey Jonathan, I was wondering if you could give me a quote for installing a getrag 265 in my 740. It currently has an aw
    I did a search and saw you had some TPS adapters. Do you have one that I can put a LH 2.4.2 (potentiometer) TPS on a 2.2 TPS (WOT and idle only) throttle body? Thanks.
    to r-sports international HQ

    what other products do you have in stock now that could substitute the 98mm crank that might pop up in early 2012 :\

    i need a getrag adapter and cometic mls headgasket
    Hi Jonathan where are you i can not contact you?
    A long time passed by the payement but there is no info from you_?
  • Loading…
  • Loading…
  • Loading…
Back
Top