hessam69
Well-known member
- Joined
- Jun 19, 2009
- Location
- Sydney, Australia
Hey,
About relocating the AMM to the otherside of the engine bay when +T, I know you have to cut the connector and lengthen the wires, but I was thinking would it be possible to make a harness about 3 feet long that plugs into the original connector, then is joined to another AMM connector on the other side then to the AMM? I would have to make female spade terminals to plug onto the male terminals of the connector.
This saves cutting the original harness.
What do you think?
About relocating the AMM to the otherside of the engine bay when +T, I know you have to cut the connector and lengthen the wires, but I was thinking would it be possible to make a harness about 3 feet long that plugs into the original connector, then is joined to another AMM connector on the other side then to the AMM? I would have to make female spade terminals to plug onto the male terminals of the connector.
This saves cutting the original harness.
What do you think?