Deb the 940
 

https://i.postimg.cc/rsZsHY4j/20200404-131006.jpg

Picked it up for 950, needs a couple maintenance things but not much

Cant wait to start with the mods, but maintenance first, the boring ****

Got a water pump(it needs it) took out the ic started removing the turbo, ordering a new ic and turbo, and piping for the 3" amm right now

https://i.postimg.cc/qBKmBWQV/20200404-164123.jpg

Throwing around the idea of hood/fender exit for exhaust, dont mind loud, my jeep was a 5.2 with open exhaust....very loud, thoughts?

Loud is one thing, the broken garden tractor sound another.

Good point

Had to finish wiring up my cams today but got a little time in.

https://i.postimg.cc/xCmxKTh2/20200406-144403.jpg

https://i.postimg.cc/8PvpjhtK/20200406-150514.jpg

https://i.postimg.cc/vDF0qFRV/20200406-163511.jpg got some recycling

Didnt get too far today, put together my new couch. Got the mani and turbo off though.

https://i.postimg.cc/Z5qvNBLM/20200407-160639.jpg

https://i.postimg.cc/g0W95RBM/20200407-160649.jpg

The good 13c is for sale if anyone wants it

https://i.postimg.cc/NjZc7FX4/Screen...ight-Owl-X.jpgimage upload and copy directlink

Gotta keep an eye on my love!

https://i.postimg.cc/RCsJxX8Z/20200408-140828.jpg

Got the new water pump on, no the amm is not going there

https://i.postimg.cc/G3zD6wM3/20200409-150330.jpgfree picture upload forgot how much this needed to be opened up


https://i.postimg.cc/7ZGXJmLS/20200409-164358.jpg

Well the 13c sure is cute!

I'm currently clocking the turbo whilst sitting at my kitchen table drinking wine:lol:

https://i.postimg.cc/tCTbMSyK/20200409-174950.jpg got it clocked now just need the feed and drain which should be here tomo

I'd swap to the bigger water pump pulley so you'd have less water pressure at higher racing rpm.

Got my shower redcoated....that was fun:roll: but I did get the ac out and got the intercooler put in and cold side piping figured out. Have the turbo in place to try to figure out intake and hotside piping. Have an MBC and downpipe on the way. Also got the gauge pod in and screwing with wiring, weee!


https://i.postimg.cc/fbbbsy7x/20200411-163556.jpgfree image upload

https://i.postimg.cc/x8QD0FrW/20200411-163606.jpg

https://i.postimg.cc/VLz2Cvjg/20200417-184741.jpg
Anyone remember which size bolts hold these on? Also the 0g and 4g wiring is for my beats:)

Also trying to figure out the an of this kinguawa(or whatever it is) feed is for the m14x1.5-?an adapter. The one on the turbo is -4an...no idea what the other side is

https://i.postimg.cc/HxK2YpQQ/20200417-184804.jpg

3" dp on the way...still, also got a nice mbc. It's making headway!

https://i.postimg.cc/xdvKTz2f/20200503-175419.jpg got to play a little today. Got the turbo on, oil feed on, drain is done, oil pressure sender on, mbc on and mounted, oil cooler arm back on welded a vband onto 3" dp, and of course some paint

I like it. Automatic transmission? It will certainly crush some souls when done.

Yeah its autotragic, gonna get the accum mod though. Looking for a turbo cam/gear now

That poor old head gasket is gonna pop

Yeah it's ok, easy fix as we all know

Already ready to blow that hg;)

https://i.postimg.cc/zfz0tG1r/20200504-164956.jpg

I am considering getting an extra hg and blots for when it does happen. I fully expect it....ill have a wideband and what not but eh, it's an old gasket