Turbobricks Forums

Turbobricks Forums (https://forums.turbobricks.com/index.php)
-   projects & restorations (https://forums.turbobricks.com/forumdisplay.php?f=22)
-   -   Deb the 940 (https://forums.turbobricks.com/showthread.php?t=354303)

Wilford Brimley 05-05-2020 11:11 PM

Ordered head gasket kit with bolts(just in case) and a gates timing belt and new tensioner since I plan to run a turbo cam

swedishiron.com 05-05-2020 11:26 PM

Message me if you need / want a 3" LH2.4 AMM.

Wilford Brimley 05-06-2020 11:50 AM

Quote:

Originally Posted by swedishiron.com (Post 6076506)
Message me if you need / want a 3" LH2.4 AMM.

I have one on the car currently

77volvo245 05-06-2020 02:00 PM

The AMM needs to be 6-8 inches away from the inlet of the turbo..

Wilford Brimley 05-07-2020 10:14 AM

Quote:

Originally Posted by 77volvo245 (Post 6076672)
The AMM needs to be 6-8 inches away from the inlet of the turbo..

Oh I didn't know! Thanks for the heads up I'll move it

white855T 05-07-2020 11:18 AM

Quote:

Originally Posted by Wilford Brimley (Post 6076935)
Oh I didn't know! Thanks for the heads up I'll move it

I was going to mention this as well. You basically wanted where it would be in stock location or close by. It will get cooked being too close to turbo.

Cwazywazy 05-07-2020 04:42 PM

I used to have mine in that same spot. It was fine with a 15g, but I got some funky running/stalling issues after upgrading the turbo that were solved after switching to a stockish intake configuration.

Wilford Brimley 05-07-2020 08:38 PM

Quote:

Originally Posted by Cwazywazy (Post 6077081)
I used to have mine in that same spot. It was fine with a 15g, but I got some funky running/stalling issues after upgrading the turbo that were solved after switching to a stockish intake configuration.

I'll be doing the stockish intake with a nice hot air intake.

Waiting for my aem wideband and 02 bung so I can weld them in and fire this bitch

Wilford Brimley 05-17-2020 11:34 PM

So I tried starting it and the tbelt snapped(i knew it was close lol)so I put on my new tensioner and gates belt, started it again and it idles smooth for like 2 seconds then afr goes 17-20 and it sputters and idles reeeealll lumpy. I think the timing is right but could be wrong. Could the 3"amm on the stock fuel and computers cause it to go rich? Also wonder if there is a vac leak or bov isnt staying shut. Could be timing too I guess?

Wilford Brimley 05-18-2020 11:30 PM

Seemed like a combo of amm and bov. So it runs good idles a tiny bit meh at 14.4 but whatever Iguess, 21-22inhg, set her down to go for a drive and the tire goes flat from being old and ****ty:roll: :lol:

Mbeas96 05-19-2020 11:07 AM

Lh2.4 constantly tries to keep 14.7 at idle so 14.4 is just about perfect.

Wilford Brimley 05-19-2020 11:04 PM

Sweet. Now I gotta find the cheapest tires possible for the car since I want wider wheels and tires but too busy too figure that out right now

Wilford Brimley 05-24-2020 08:51 PM

Took it on its first drive today, about 30 miles. All gauges show good health but it randomly misses/goes rich for a fraction of a second, it's odd. Seem to stutter a bit at higher psi but other than that it's a blast:)

Wilford Brimley 05-25-2020 09:28 PM

Got about 100 miles on it...has an oil drip somewhere I gotta find. Got her some sideways action today since it rained. I reeeeallly need to retool the suspension. The big sway in the rear and nothing else modded feels fckin werid

Wilford Brimley 05-26-2020 09:29 PM

https://i.postimg.cc/BQ6X97PP/20200526-181326.jpg

There's a monster truck in my driveway!

Wilford Brimley 06-27-2020 01:42 AM

Nut fell off my cheap chinese turbo and shredded the wheel:omg: new turbo has 4" intake lol moved some **** around yadda yadda. Painting **** like I always do

https://i.postimg.cc/VL1DLBCz/20200626-223847.jpg

Wilford Brimley 06-27-2020 01:46 AM

https://i.postimg.cc/9FMwpD3G/202006...3-IMG-5793.jpg

https://i.postimg.cc/k5F59C3J/202006...2-IMG-5779.jpg

Wilford Brimley 06-27-2020 08:38 PM

Waiting for some couplers, also welded some exhaust stuff together, will be back on the road tomo

https://i.postimg.cc/RZq5NZ1g/202006...9-IMG-5801.jpga true friend poem

LC4CARL 06-27-2020 10:18 PM

Grr. Sorry about your new turbo.

Wilford Brimley 06-27-2020 10:47 PM

Eh you get what you pay for

LC4CARL 06-29-2020 08:20 PM

How many times are we supposed to reuse head bolts? Or is there a length dimension we can check to see if they are ok?

Wilford Brimley 06-29-2020 09:14 PM

I think once in a pinch

Wilford Brimley 08-09-2020 05:48 PM

https://i.postimg.cc/rpDcRD0G/20200809-141557.jpg

I d k wtf I'm doing

LC4CARL 08-10-2020 10:20 AM

Sweet.

Quin 08-11-2020 01:50 AM

god damn it


All times are GMT -4. The time now is 01:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.