• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

B200FT base MAP for MS1

Fretka

New member
Joined
Dec 22, 2013
Hey guys!

Maybe someone could share base ignition and fuel map for B200FT engine, MS1 ecu? Seen only pair for B230FT. Bringing it to proper tuner of course, only it's a little easier with some base map. Car idles okay for now.

Working in TunerStudio
 
Just use the table generator, and find a stock ignition curve then interpolate the missing values. Follow the manual for making a new table. It'll be about the same amount of time as cleaning up someone else's junk, but it makes you know and understand the necessary changes that need to be made and better suits your tune to the rest of your mods.
 
Thanks for answers. Such late reply because I already forgot about this thread, haha. Will upload my engine's map when I have it.
Works like a charm when warm, cold idle has not been sorted out yet.

Answering to other replies - yes, MS1 is POS but I had it laying around for years and didn't want to spend 1000eur on this ****box. If it works, it works tho
 
Back
Top