Turbobricks Forums

Turbobricks Forums (https://forums.tbforums.com/index.php)
-   projects & restorations (https://forums.tbforums.com/forumdisplay.php?f=22)
-   -   Tan Catamaran (85 244 DL) (https://forums.tbforums.com/showthread.php?t=195397)

240keith 02-01-2010 04:37 PM

Tan Catamaran (85 244 DL)
 
I have got the various details to this posted in several different places, so i figured i might as well put it all in one place, with some details, and a somewhat coherent timeline...

This is the story of how...

I got drafted to the DARK side…

Volvos…

It starts with my two buddies… Alden and Scott… Alden had a project 744TI that I had the pleasure of not only helping him pick up, and helping him work on, but also helping him find and tear apart a parts car for… Scott had had several Volvo wagons in the past, and he always seemed to enjoy them for reasons that I never understood…

Anyways, in January 2009, I stumbled upon a listing on craigslist for an n/a 85 244 with a M46 in was in a small town about 15 miles away, and Alden and I went to look at it twice… and I ended up buying it, figuring I could at least part it and make my money back, or sell it as a lemons car

The car had new brakes within the last 10,000 miles, new clutch within the last 15,000
A new cat within the last two years, new cap and rotor, new spark plugs, and a new oxygen sensor and recent tires, and a newer transmission mount

The owner was asking $300, with the condition that it was only sold with a bill of sale, as he couldn’t get it to pass smog… he thought that it was an injection computer, we were pretty sure it was something else, something simple, as it had passed smog the previous year without any problems … I ended up paying $250 for it…

This is what it looked like, very close to the first week I got it…

<a href="http://www.flickr.com/photos/70727249@N00/4323674740/" title="DSCF0196.JPG by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4044/4323674740_5abb1aaca0.jpg" width="500" height="375" alt="DSCF0196.JPG" /></a>

So, we dragged it back to my place, and did a few things, we tried a new thermostat, we tried a new computer, we rebuilt the wiring harness, we swapped coolant sensors (both of them), we did an oil change and a seafoam torture regime, and a new timing belt and it was still running pig rich… you could smell the raw fuel… anyways, after screwing around with it for a while, we decided to look at the oxygen sensor…

When we pulled it out, the globe was completely gone… it was trying to pump enough fuel to overcome that…

Anyways, after swapping oxygen sensors, it passed smog with almost zero emissions…


At this point, I had found a guy in town parting out a 76 245… so I snagged a few things
Flat hood
Grill
Light assemblies
Mirrors
Cam (B)


I swapped on the flat hood and lights and did an autocross on a set of borrowed 10 spokes (thanks Alden!)… it wasn’t anything spectacular, just an average 25 year old car, with average worn out suspension…but it was lots of fun…

<a href="http://www.flickr.com/photos/70727249@N00/4322940221/" title="3609433374_41eba61875 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4014/4322940221_80cbabee96.jpg" width="500" height="333" alt="3609433374_41eba61875" /></a>

It did another auto x

<a href="http://www.flickr.com/photos/70727249@N00/4322896949/" title="normal_ufo6_group4_0137a by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4062/4322896949_da41b4c96b.jpg" width="500" height="210" alt="normal_ufo6_group4_0137a" /></a>

Then the B cam went in…

Transmission fluid got swapped with some B&M Trickshift



Somewhere in here, I bought a set of 25/25 sways from Ken, and the front made its way onto the car, ive still got to shoehorn the rear in…

I also bought a set of Nova wheels from Ken, traded them to Alden for the set of 10 spokes that I had borrowed before, and then I cleaned them, and continued on to destroy the tires... I believe that we removed the wear bars completely…

<a href="http://www.flickr.com/photos/70727249@N00/4322896171/" title="IMG_7024 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4022/4322896171_e82c3cfdcf.jpg" width="500" height="375" alt="IMG_7024" /></a>

I installed a pioneer cd player and some speakers (stocks up front mazda 6 x9s in the back)

<a href="http://www.flickr.com/photos/70727249@N00/4323001765/" title="PC200029 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2679/4323001765_6085a23350.jpg" width="500" height="375" alt="PC200029" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4323098425/" title="P2010035 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4048/4323098425_4de712b5b6.jpg" width="500" height="375" alt="P2010035" /></a>

I painted the turn signal bezels chrome, converted the lights to use both filaments

<a href="http://www.flickr.com/photos/70727249@N00/4215155346/" title="PC250059 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2607/4215155346_2a825d03ff.jpg" width="375" height="500" alt="PC250059" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4323084351/" title="P2010028 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4031/4323084351_fbaa25459b.jpg" width="375" height="500" alt="P2010028" /></a>

I converted the car to the all black turbo trim

<a href="http://www.flickr.com/photos/70727249@N00/4323673994/" title="P1140054 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4050/4323673994_3306c6a651.jpg" width="500" height="375" alt="P1140054" /></a>

Eventually, I swapped back to steelies, cause ive got good tires for them…

<a href="http://www.flickr.com/photos/70727249@N00/4275463753/" title="P1140048 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2742/4275463753_ea4e41a40c.jpg" width="500" height="375" alt="P1140048" /></a>

I installed a set of yellow driving lights in the front bumper

<a href="http://www.flickr.com/photos/70727249@N00/4073524606/" title="P1010054 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2779/4073524606_d3bbf81fe2.jpg" width="375" height="500" alt="P1010054" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4323812948/" title="P2010027 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4021/4323812948_e0b810068c.jpg" width="500" height="375" alt="P2010027" /></a>

I waxed the crap out of it (clay bar, polishing compound stages 1, 2 and wax) and removed the pinstriping...

Part way done :
<a href="http://www.flickr.com/photos/70727249@N00/4178305076/" title="P1010034 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2776/4178305076_c77dc59e79.jpg" width="375" height="500" alt="P1010034" /></a>

Switched to a set of flat faced h4s, with 90/100 bulbs (with a ricer blue tinge)

<a href="http://www.flickr.com/photos/70727249@N00/4323007567/" title="PC200005 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4066/4323007567_68d5fedafb.jpg" width="408" height="500" alt="PC200005" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4323004689/" title="PC230035 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4056/4323004689_3ac46014df.jpg" width="500" height="375" alt="PC230035" /></a>

Installed an oil pressure, volt gauge and vacuum gauge

<a href="http://www.flickr.com/photos/70727249@N00/4323653052/" title="P1060108 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4024/4323653052_40fed8d423.jpg" width="500" height="375" alt="P1060108" /></a>

I put some red L.E.D.s in the gauge cluster

<a href="http://www.flickr.com/photos/70727249@N00/4323733358/" title="PC120046 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4005/4323733358_2fc07a0b83.jpg" width="500" height="375" alt="PC120046" /></a>

I painted and installed a set of stock G.T. braces:

<a href="http://www.flickr.com/photos/70727249@N00/4323805508/" title="P2010022 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4056/4323805508_a063875232.jpg" width="500" height="375" alt="P2010022" /></a>

I also threw on a set of NAPA lifetime spark plug wires… cheap, but they will work for now…

<a href="http://www.flickr.com/photos/70727249@N00/4323073609/" title="P2010023 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4004/4323073609_32b04cd282.jpg" width="500" height="375" alt="P2010023" /></a>


We also removed all the exhaust except the catalytic converter and the resonator… made it a bit noisier, but it works for the mean time…



Oh, and I love to take pictures, so here are a bunch from assorted photoshoots:

<a href="http://www.flickr.com/photos/70727249@N00/4323667558/" title="P1140013 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4038/4323667558_7239383805.jpg" width="500" height="375" alt="P1140013" /></a>

<a href="http://www.flickr.com/photos/redvolvo/4269867330/" title="_MG_6372 by sdingle, on Flickr"><img src="http://farm3.static.flickr.com/2718/4269867330_cc85dafd1c.jpg" width="500" height="333" alt="_MG_6372" /></a>

<a href="http://www.flickr.com/photos/redvolvo/4269860144/" title="_MG_6396 by sdingle, on Flickr"><img src="http://farm3.static.flickr.com/2719/4269860144_1d2982dca8.jpg" width="500" height="332" alt="_MG_6396" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4276202374/" title="P1140018 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4037/4276202374_8a40dff578.jpg" width="500" height="375" alt="P1140018" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4271097056/" title="P1080003 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4064/4271097056_c6d2a1fae5.jpg" width="500" height="375" alt="P1080003" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4227303255/" title="PC250058 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2765/4227303255_faa0e33b6e.jpg" width="500" height="375" alt="PC250058" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4214383083/" title="PC250066 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2781/4214383083_48a2cc315a.jpg" width="500" height="375" alt="PC250066" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4214541568/" title="PC250081 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4008/4214541568_34b6bf0c9f.jpg" width="500" height="375" alt="PC250081" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4213728571/" title="PC250038 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4016/4213728571_46737f5c65.jpg" width="500" height="270" alt="PC250038" /></a>

<a href="http://www.flickr.com/photos/redvolvo/4269133391/" title="_MG_6339 by sdingle, on Flickr"><img src="http://farm5.static.flickr.com/4020/4269133391_a54d287ed9.jpg" width="500" height="332" alt="_MG_6339" /></a>

new-ish alternator in the middle of February (somewhat recently rebuilt 70 amp)



Future Plans:

Suspension (HDs and an altitude drop)
Chassis and Strut Tower - Strut Tower Braces
New wiring harness (Engine at least)
Better seats (Im not sure what yet, but the stock buckets are starting to bother me…)
Short shift kit
Powdercoat the 10 spokes -- white
Sound deadening


Far Future Plans:
16 valve head
After market engine management
Relocate battery

chirish1234 02-01-2010 04:42 PM

awesome car dude!

wisturbo 02-01-2010 04:58 PM

I love it! Why no love for the coffin hood though? I bet it would look good on there with the suspension a tad lower. :volvo:

varg 02-01-2010 05:03 PM

Beautiful car, I like the plug wires, I have the same set :lol:

240keith 02-01-2010 05:22 PM

Quote:

Originally Posted by chirish1234 (Post 2935962)
awesome car dude!

thanks! im enjoying it... its a fun little car...

Quote:

Originally Posted by wisturbo (Post 2936001)
I love it! Why no love for the coffin hood though? I bet it would look good on there with the suspension a tad lower. :volvo:

i enjoy the coffin hood, and i have all the stuff to swap back and forth, but for 60 bucks for all of it(lights, buckets,turn signals, perfect grille and hood), it was too good to pass up

Quote:

Originally Posted by varg (Post 2936017)
Beautiful car, I like the plug wires, I have the same set :lol:

yea, they were on sale when i got them, and the last set separated when i tried to remove them, but it sounds like as long as i take them back in there they will keep exchanging them... lifetime warranty ftw

SL8Brick 02-01-2010 05:34 PM

Nice ride! I like everything, except for this....

Quote:

Originally Posted by 240keith (Post 2935947)
I installed a set of yellow driving lights in the front bumper

<a href="http://www.flickr.com/photos/70727249@N00/4073524606/" title="P1010054 by keith.hemmis, on Flickr"><img src="http://farm3.static.flickr.com/2779/4073524606_d3bbf81fe2.jpg" width="375" height="500" alt="P1010054" /></a>

<a href="http://www.flickr.com/photos/70727249@N00/4323812948/" title="P2010027 by keith.hemmis, on Flickr"><img src="http://farm5.static.flickr.com/4021/4323812948_e0b810068c.jpg" width="500" height="375" alt="P2010027" /></a>

IMO, your car is screaming for a set of Hella 500 rounds mounted on top of the bumper. They'll blend right in with the dual rounds/flathood grill and won't get smashed by some soccer mom trying to park her Ford Expedition in front of you. :)

doucheNozzle 02-01-2010 05:54 PM

Looks good Keith! I think I want to see if we can hit your hood a bit better. Flat black still, then wet sand, then some clear to make it fit a little bit better. We also need to get you a sub amp!

240keith 02-01-2010 07:41 PM

Quote:

Originally Posted by SL8Brick (Post 2936113)
Nice ride! I like everything, except for this....



IMO, your car is screaming for a set of Hella 500 rounds mounted on top of the bumper. They'll blend right in with the dual rounds/flathood grill and won't get smashed by some soccer mom trying to park her Ford Expedition in front of you. :)

yea, them mounted on the bumper kind of worries me, as far as stupid drivers, as well as rock chips, but it would be hard to get the angles of big round lights to work with the sloped front of the grille... this set up will get modified at some point, but for now, they are really good at flashing people that cut me off...

Quote:

Originally Posted by scottyd (Post 2936176)
Looks good Keith! I think I want to see if we can hit your hood a bit better. Flat black still, then wet sand, then some clear to make it fit a little bit better. We also need to get you a sub amp!

yea, the hood needs to be prepd and repainted again, but i need to do it somewhere when i have more people... its a bitch and a half to install / align it by yourself...

and yea, the sub needs an amp, but first the car needs to run again... i think its time to try and rebuild an alternator...

keith

brickborg 02-01-2010 08:06 PM

That car is screaming so loud for a B230ft that I can hear it here in Minnesota.

Nice work!

Crazychopstick 02-01-2010 08:35 PM

Needs low so badly.

240keith 02-01-2010 09:07 PM

Quote:

Originally Posted by BrickBorg612 (Post 2936512)
That car is screaming so loud for a B230ft that I can hear it here in Minnesota.

Nice work!

thanks, a turbo is in the plan at some point, just not sure when... im not really in any huge hurry to do it... i want to get it up and running reliability before i start throwing more potential problems at it..

Quote:

Originally Posted by Crazychopstick (Post 2936602)
Needs low so badly.

yes, this thing is at full tilt 4x status, and its real bad... but hopefully getting suspension soon...

fender gap is over-rated, and there is a plan to eliminate a good portion of it...

shellshock 02-01-2010 11:36 PM

Looks good dude! With good paint like yours, why not go ahead and have the hood color matched with the rest of the car? That'll make it look super clean!

doucheNozzle 02-01-2010 11:37 PM

Quote:

Originally Posted by shellshock (Post 2937026)
Looks good dude! With good paint like yours, why not go ahead and have the hood color matched with the rest of the car? That'll make it look super clean!

That costs $

240keith 02-01-2010 11:53 PM

Quote:

Originally Posted by shellshock (Post 2937026)
Looks good dude! With good paint like yours, why not go ahead and have the hood color matched with the rest of the car? That'll make it look super clean!

Quote:

Originally Posted by scottyd (Post 2937028)
That costs $

yea, more or less...

flat black is kind of a band-aid... it will get color matched at some point, but probably not for a while...

thanks for the complement about the paint...

keith

Crazychopstick 02-02-2010 08:20 AM

http://forums.turbobricks.com/showthread.php?t=173081

What's that?

240keith 02-02-2010 03:23 PM

Quote:

Originally Posted by Crazychopstick (Post 2937398)

hah, i totally forgot that was there... i will see if we can have it deleted...

keith

Prime240 02-02-2010 05:36 PM

Nice clean car!
Me like!

240keith 03-06-2010 01:38 AM

well, somebody took some pictures of my pile at a few auto xs, so i thought i would toss them up here...

http://photos-c.ak.fbcdn.net/hphotos..._3684028_n.jpg

this one, was after enjoying a nice breakfast of cones... popped the airdamn off the passenger side corner...

http://hphotos-snc3.fbcdn.net/hs486...._4112980_n.jpg


http://hphotos-snc3.fbcdn.net/hs506...._5516838_n.jpg

all the above were courtesy of Mary Pozzi (if you ever read this, thanks Mary!)

doucheNozzle 03-06-2010 05:18 AM

Haha that's me driving it in the last 2.

charnock 03-06-2010 02:42 PM

Quote:

Originally Posted by 240keith (Post 3007121)

haha love that air dam siting at the same level as the ground. looks like you have a lot of fun with the car, nice one :)

240keith 03-06-2010 04:29 PM

Quote:

Originally Posted by scottyd (Post 3007311)
Haha that's me driving it in the last 2.

yep

Quote:

Originally Posted by charnock (Post 3007631)
haha love that air dam siting at the same level as the ground. looks like you have a lot of fun with the car, nice one :)

it takes quite a bit to get it like that (i think i nailed 3 or 4 cones there... and when i crossed the finish, so guy comes running up, and was like, your bumper is falling off...

my only reaction was, " hah, its a volvo, ive got zip ties, it will be all good..."


yea, i have a lot of fun with the car... its cheap thrills, and a good way to learn / experiment with stuff

242Bleek 03-06-2010 09:53 PM

Awesome beige. I love it! Now slam it more:-D

doucheNozzle 03-06-2010 10:24 PM

We're working on it. Hopefully at the western meet.

240keith 03-06-2010 10:31 PM

Quote:

Originally Posted by scottyd (Post 3008084)
We're working on it. Hopefully at the western meet.

this... hoping to be lighter by approximately 2 coils

240keith 03-16-2010 08:18 PM

so we did another Autox... and i stole some more of Mary's photos...

http://hphotos-snc3.fbcdn.net/hs053...._2992711_n.jpg

http://photos-h.ak.fbcdn.net/hphotos..._4242058_n.jpg


in case anybody is looking for Mary's photo collection, it can be found here : http://marypozzi.zenfolio.com/

thanks for taking pictures Mary...

and for my sake...

newer knock sensor
installed a mismatched front arm-rest, like so :

http://hphotos-snc3.fbcdn.net/hs412....71_58175_n.jpg

repainted my drivers and passengers side black window trim, and bottom door moldings

and the buttcheeks too


All times are GMT -4. The time now is 01:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.