Turbobricks Forums

Turbobricks Forums (https://forums.turbobricks.com/index.php)
-   projects & restorations (https://forums.turbobricks.com/forumdisplay.php?f=22)
-   -   Deb the 940 (https://forums.turbobricks.com/showthread.php?t=354303)

Wilford Brimley 04-04-2020 04:17 PM

Deb the 940
 
https://i.postimg.cc/rsZsHY4j/20200404-131006.jpg

Picked it up for 950, needs a couple maintenance things but not much

Cant wait to start with the mods, but maintenance first, the boring ****

Wilford Brimley 04-04-2020 07:49 PM

Got a water pump(it needs it) took out the ic started removing the turbo, ordering a new ic and turbo, and piping for the 3" amm right now

https://i.postimg.cc/qBKmBWQV/20200404-164123.jpg

Wilford Brimley 04-04-2020 07:51 PM

https://i.postimg.cc/90p260nC/20200404-164132.jpg

Wilford Brimley 04-05-2020 12:06 AM

Throwing around the idea of hood/fender exit for exhaust, dont mind loud, my jeep was a 5.2 with open exhaust....very loud, thoughts?

Martin L. 04-05-2020 04:48 AM

Loud is one thing, the broken garden tractor sound another.

Wilford Brimley 04-05-2020 01:27 PM

Good point

Wilford Brimley 04-06-2020 08:43 PM

Had to finish wiring up my cams today but got a little time in.

https://i.postimg.cc/xCmxKTh2/20200406-144403.jpg

https://i.postimg.cc/8PvpjhtK/20200406-150514.jpg

https://i.postimg.cc/vDF0qFRV/20200406-163511.jpg got some recycling

Wilford Brimley 04-07-2020 11:28 PM

Didnt get too far today, put together my new couch. Got the mani and turbo off though.

https://i.postimg.cc/Z5qvNBLM/20200407-160639.jpg

Wilford Brimley 04-07-2020 11:29 PM

https://i.postimg.cc/g0W95RBM/20200407-160649.jpg

The good 13c is for sale if anyone wants it

Wilford Brimley 04-07-2020 11:33 PM

https://i.postimg.cc/NjZc7FX4/Screen...ight-Owl-X.jpgimage upload and copy directlink

Gotta keep an eye on my love!

Wilford Brimley 04-08-2020 05:21 PM

https://i.postimg.cc/RCsJxX8Z/20200408-140828.jpg

Got the new water pump on, no the amm is not going there

Wilford Brimley 04-09-2020 06:39 PM

https://i.postimg.cc/G3zD6wM3/20200409-150330.jpgfree picture upload forgot how much this needed to be opened up


https://i.postimg.cc/7ZGXJmLS/20200409-164358.jpg

Well the 13c sure is cute!

I'm currently clocking the turbo whilst sitting at my kitchen table drinking wine:lol:

Wilford Brimley 04-09-2020 08:51 PM

https://i.postimg.cc/tCTbMSyK/20200409-174950.jpg got it clocked now just need the feed and drain which should be here tomo

sbabbs 04-09-2020 09:00 PM

I'd swap to the bigger water pump pulley so you'd have less water pressure at higher racing rpm.

Wilford Brimley 04-11-2020 09:44 PM

Got my shower redcoated....that was fun:roll: but I did get the ac out and got the intercooler put in and cold side piping figured out. Have the turbo in place to try to figure out intake and hotside piping. Have an MBC and downpipe on the way. Also got the gauge pod in and screwing with wiring, weee!


https://i.postimg.cc/fbbbsy7x/20200411-163556.jpgfree image upload

https://i.postimg.cc/x8QD0FrW/20200411-163606.jpg

Wilford Brimley 04-17-2020 10:24 PM

https://i.postimg.cc/VLz2Cvjg/20200417-184741.jpg
Anyone remember which size bolts hold these on? Also the 0g and 4g wiring is for my beats:)

Wilford Brimley 04-17-2020 10:27 PM

Also trying to figure out the an of this kinguawa(or whatever it is) feed is for the m14x1.5-?an adapter. The one on the turbo is -4an...no idea what the other side is

https://i.postimg.cc/HxK2YpQQ/20200417-184804.jpg

3" dp on the way...still, also got a nice mbc. It's making headway!

Wilford Brimley 05-03-2020 10:50 PM

https://i.postimg.cc/xdvKTz2f/20200503-175419.jpg got to play a little today. Got the turbo on, oil feed on, drain is done, oil pressure sender on, mbc on and mounted, oil cooler arm back on welded a vband onto 3" dp, and of course some paint

Wilford Brimley 05-03-2020 10:52 PM

https://i.postimg.cc/mDR5XzMc/20200503-182852.jpg

Sjeng 05-04-2020 01:28 AM

I like it. Automatic transmission? It will certainly crush some souls when done.

Wilford Brimley 05-04-2020 01:25 PM

Yeah its autotragic, gonna get the accum mod though. Looking for a turbo cam/gear now

ZVOLV 05-04-2020 01:43 PM

That poor old head gasket is gonna pop

Wilford Brimley 05-04-2020 08:58 PM

Yeah it's ok, easy fix as we all know

Wilford Brimley 05-04-2020 08:59 PM

Already ready to blow that hg;)

https://i.postimg.cc/zfz0tG1r/20200504-164956.jpg

Wilford Brimley 05-04-2020 09:16 PM

I am considering getting an extra hg and blots for when it does happen. I fully expect it....ill have a wideband and what not but eh, it's an old gasket


All times are GMT -4. The time now is 02:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.