home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Search Forums

Showing results 1 to 50 of 300
Search took 0.95 seconds.
Search: Posts Made By: OttoB
Forum: performance & suspension 05-13-2015, 12:28 PM
Replies: 31
Views: 1,380
Posted By OttoB
My K-Jet misses a lot. Fuel pressure is only 45...

My K-Jet misses a lot. Fuel pressure is only 45 psi.....
Forum: maintenance & nonperformance 05-02-2015, 04:21 AM
Replies: 20
Views: 531
Posted By OttoB
I had hard time to get fluid moving when I was...

I had hard time to get fluid moving when I was filling and bleeding complete dry system. Finally I removed brake pads and pumped pistons to outer limit. Removed bleed screws and pressed pistons in...
Forum: maintenance & nonperformance 04-25-2015, 01:30 PM
Replies: 41
Views: 1,357
Posted By OttoB
Mounting lowering springs on a 240 is about 2...

Mounting lowering springs on a 240 is about 2 hours job with proper tools. No need to remove front struts from the car.
Forum: maintenance & nonperformance 04-23-2015, 09:13 AM
Replies: 18
Views: 632
Posted By OttoB
Volvos wp got cheaper long time ago. There was...

Volvos wp got cheaper long time ago. There was quite much complaiments about quality of those new pumps at swedish forums back then. Volvo just said they "matched quality to the market level" or...
Forum: maintenance & nonperformance 02-25-2015, 03:56 PM
Replies: 4
Views: 333
Posted By OttoB
Lesjöfors has sport springs for 164, and Addco...

Lesjöfors has sport springs for 164, and Addco has bigger front and rear sways.
Forum: performance & suspension 02-16-2015, 09:16 AM
Replies: 12
Views: 449
Posted By OttoB
Early B230 is okay. Just add second bearing half...

Early B230 is okay. Just add second bearing half to support stock axial bearing. Minor grinding needed.
Forum: maintenance & nonperformance 02-14-2015, 02:57 AM
Replies: 11
Views: 339
Posted By OttoB
Is there something about "parallel flow...

Is there something about "parallel flow condenser" when running with R134?
Forum: performance & suspension 02-13-2015, 03:36 AM
Replies: 21
Views: 1,485
Posted By OttoB
Those carbs was 300-series only, so no automatics.

Those carbs was 300-series only, so no automatics.
Forum: performance & suspension 02-10-2015, 02:48 PM
Replies: 21
Views: 1,485
Posted By OttoB
Good comparision between Solex 40 and K-Jet in a...

Good comparision between Solex 40 and K-Jet in a Volvo is B19 E and R-Sport engines. Both have 118 hp with K-cam. Biggest noticable difference is noice....
Forum: maintenance & nonperformance 01-23-2015, 04:43 PM
Replies: 17
Views: 515
Posted By OttoB
Google swedish car magazine Klassiker and Volvo...

Google swedish car magazine Klassiker and Volvo 165. They have 165 as a project, videos and stuff.
Forum: maintenance & nonperformance 01-02-2015, 04:46 AM
Replies: 10
Views: 477
Posted By OttoB
I'll just leave this here... ...

I'll just leave this here...


http://forums.turbobricks.com/showthread.php?t=288874
Forum: maintenance & nonperformance 12-22-2014, 10:02 AM
Replies: 32
Views: 962
Posted By OttoB
Gangster caps is final proof that cousins...

Gangster caps is final proof that cousins shouldn't have children.
Forum: maintenance & nonperformance 12-21-2014, 03:05 PM
Replies: 31
740: Jeep axle
Views: 865
Posted By OttoB
Distance from pinion to ring is different at...

Distance from pinion to ring is different at Volvo's carrier. Some machining is needed to move ring away from pinion. That carrier on ebay ad you linked, it doesn't have place for tone ring.
Forum: showroom 12-21-2014, 10:26 AM
Replies: 21
Views: 1,122
Posted By OttoB
Those Hydras look so good on that 245. Does it...

Those Hydras look so good on that 245. Does it have spacers?
Forum: maintenance & nonperformance 12-07-2014, 11:21 AM
Replies: 2
Views: 291
Posted By OttoB
If you got industrial supply shop near by, ask if...

If you got industrial supply shop near by, ask if they have belt cutting machine. Most shops who sell belts usually have that. They have wide sleeves of timing belts and just cut needed width from...
Forum: maintenance & nonperformance 12-05-2014, 01:20 AM
Replies: 11
Views: 637
Posted By OttoB
Loose magnets often cause wipers to stall or slow...

Loose magnets often cause wipers to stall or slow down. Have glued those in every 240 I have owned.
Forum: performance & suspension 11-07-2014, 09:09 AM
Replies: 17
Views: 788
Posted By OttoB
I don't care who is quilty, I'm missing Lahtinen...

I don't care who is quilty, I'm missing Lahtinen and machine gun. Tack Jonny V..

Cheap and easy ignition would be from B230E and B230 K, those have Bosch EZK 118 ignition system, it has MAP...
Forum: maintenance & nonperformance 09-20-2014, 09:27 AM
Replies: 3
Views: 333
Posted By OttoB
I used piece of 122 firewall with hanging pedals...

I used piece of 122 firewall with hanging pedals and master cyl. That caused interference with heater fan box,so I used 140 heater. Battery was moved under back seat. Dear god.

Maybe just use...
Forum: performance & suspension 08-16-2014, 08:44 AM
Replies: 79
Views: 3,876
Posted By OttoB
In that situation I would get B23 or B230 block...

In that situation I would get B23 or B230 block and get block o-ringed if possible. Or copper head gasget. Or custom hg from Cosmetic. Then little grindin at top on cylinder liner.
Forum: maintenance & nonperformance 07-19-2014, 05:36 PM
Replies: 13
Views: 474
Posted By OttoB
Hello This might be something for you: ...

Hello

This might be something for you:

http://www.do88.se/en/artiklar/volvo-240-turbo-b21ft-pressure-hoses-2.html
Forum: maintenance & nonperformance 07-16-2014, 04:15 PM
Replies: 9
Views: 409
Posted By OttoB
Bolt hole spacing is different between 3 and 4...

Bolt hole spacing is different between 3 and 4 cylinder calipers. 4 pot calipers are same in 122 (MY1968-1970) and 140.
Forum: performance & suspension 07-15-2014, 05:31 PM
Replies: 38
Views: 3,140
Posted By OttoB
240 B200E should have A-cam, V-cam on 740 with...

240 B200E should have A-cam, V-cam on 740 with B200E and map sensored EZK or Renix. I think Volvo got all from Bosch's menu during years 87-90
Forum: maintenance & nonperformance 07-13-2014, 04:46 PM
Replies: 4
Views: 327
Posted By OttoB
Hub is same for both bearing sizes, but there was...

Hub is same for both bearing sizes, but there was something about with ATE front brakes. I checked part numbers, they are same.
Forum: maintenance & nonperformance 07-11-2014, 06:23 AM
Replies: 18
Views: 785
Posted By OttoB
This, or if old ball joint has same threads*, use...

This, or if old ball joint has same threads*, use nut from that to press parts together. Used loc-nuts threads in much easier.


*Ball joints can have some strange threads.
Forum: performance & suspension 07-07-2014, 05:05 PM
Replies: 47
Views: 2,091
Posted By OttoB
In Finland there is Vauxhall Ventora 3.3 litre...

In Finland there is Vauxhall Ventora 3.3 litre with two blown through Strombergs. Over 700 hp.
Forum: maintenance & nonperformance 06-03-2014, 03:31 AM
Replies: 5
Views: 386
Posted By OttoB
Drill those four plastic rivets open. Then you...

Drill those four plastic rivets open. Then you will find mechanism, it is attached to mirror frame with two screws. Those might be frozen. everything gotta get away before you can remove plastic...
Forum: projects & restorations 05-18-2014, 03:08 PM
Replies: 364
Views: 48,275
Posted By OttoB
Fine mess! I just have almost finished my 245 '90...

Fine mess! I just have almost finished my 245 '90 heater swap, it was non-AC unit, and now I have vacuum controlled unit. In my project I kept "modern" dash. My CombuHeater was from much older car,...
Forum: maintenance & nonperformance 05-14-2014, 03:14 PM
Replies: 10
Views: 475
Posted By OttoB
Numbers doesn't line up. Floor mat has been off....

Numbers doesn't line up. Floor mat has been off. Maybe washed?
Forum: performance & suspension 05-14-2014, 03:04 PM
Replies: 49
Views: 1,294
Posted By OttoB
Hintercooler? Zwischencooler?

Hintercooler? Zwischencooler?
Forum: maintenance & nonperformance 05-10-2014, 05:38 PM
Replies: 12
Views: 431
Posted By OttoB
I got problem when bleeding my 240 Turbo, biggest...

I got problem when bleeding my 240 Turbo, biggest problem was rear calipers, so I took rear pads away, and pumped rear pistons almost out, had about 5 mm steel plate to limit piston movement. Opened...
Forum: performance & suspension 05-09-2014, 04:59 PM
Replies: 11
Views: 648
Posted By OttoB
GM A-body (about 78-80) front shocks are almost...

GM A-body (about 78-80) front shocks are almost same as 140 shocks, but a bit shorter, 1" maybe? Or at least that was case when I compared red Konis from both.
Forum: maintenance & nonperformance 04-24-2014, 03:44 AM
Replies: 25
Views: 906
Posted By OttoB
Yes it is certainly M18x1,5. It is from DIN...

Yes it is certainly M18x1,5. It is from DIN Fitting family, usually called "Ermeto fitting". There are three pressure ratings, L (low), M (medium) and S (high), number after pressure rating is...
Forum: maintenance & nonperformance 04-23-2014, 04:53 AM
Replies: 25
Views: 906
Posted By OttoB
#15 is called L12 "ermeto fitting" Ferrule side...

#15 is called L12 "ermeto fitting" Ferrule side (#13 and #14) has M18x1,5 thread, thread in the sandwich (#7) is M16x1,5. Spanner size for #14 should be 22 mm.

Might be hard to find one direct...
Forum: aftermarket engine management 04-22-2014, 03:22 PM
Replies: 22
Views: 547
Posted By OttoB
Diesel guys (as I) are always talking about...

Diesel guys (as I) are always talking about Lambda. Would be cool to use AFRs, "we have about 30-35 AFR"
Forum: performance & suspension 04-20-2014, 04:21 PM
Replies: 5
Views: 349
Posted By OttoB
Ok, 67 should have Dana30 (M30). Measure shaft...

Ok, 67 should have Dana30 (M30). Measure shaft tube diameter, 63 mm is diameter for Dana 30
Forum: performance & suspension 04-20-2014, 11:09 AM
Replies: 5
Views: 349
Posted By OttoB
What year? If you are lucky, you have Dana 30...

What year? If you are lucky, you have Dana 30 rear axle, and you can swap gears from 240 1030 rear axle, highest and easy to find gear is 3,54:1.
Forum: aftermarket engine management 04-19-2014, 02:39 PM
Replies: 7
Views: 503
Posted By OttoB
I know one 960 with D5 diesel and AW from B6304....

I know one 960 with D5 diesel and AW from B6304. Transmission is controlled with suprastick, works perfect what i've heard.
Forum: maintenance & nonperformance 03-27-2014, 04:14 PM
Replies: 9
Views: 386
Posted By OttoB
Ball joint thread depends on manufacturer. Volvo...

Ball joint thread depends on manufacturer. Volvo is metric (M10?)
Thread on rack is M14.
Forum: aftermarket engine management 03-07-2014, 07:28 AM
Replies: 3
Views: 391
Posted By OttoB
Fuel (mechanical) pump hole in the block. My...

Fuel (mechanical) pump hole in the block. My friend did that on his B30. Plate, threaded hall-sensor and a screw as a trigger pin on aux shaft.
Forum: maintenance & nonperformance 03-06-2014, 02:53 AM
Replies: 90
Views: 3,676
Posted By OttoB
Fuel consumption meter, just adjust injector...

Fuel consumption meter, just adjust injector constant and pulses per distance (miles or km), it has small LCD display showing fuel consumption. Also shows battery voltage. About 50 $.
...
Forum: maintenance & nonperformance 03-05-2014, 02:45 AM
Replies: 90
Views: 3,676
Posted By OttoB
240: Adjustable wiper relay (from nazivagen) ...

240: Adjustable wiper relay (from nazivagen)
940: MPGuino soon....
Forum: maintenance & nonperformance 03-02-2014, 03:39 PM
Replies: 16
Views: 1,073
Posted By OttoB
I think these are "Ermeto-fittings", L for low...

I think these are "Ermeto-fittings", L for low pressure, and with pipe OD in millimeters.

For example:
L10
L12
L15
L18
Forum: maintenance & nonperformance 02-28-2014, 02:03 PM
Replies: 13
Views: 794
Posted By OttoB
My dog dish LH 2.4 pressure plate fits right on...

My dog dish LH 2.4 pressure plate fits right on my Rex-flywheel. Just tested. Maybe problem is penta related.
Forum: maintenance & nonperformance 02-28-2014, 04:57 AM
Replies: 13
Views: 794
Posted By OttoB
Regina wheel from car has same pressure plate as...

Regina wheel from car has same pressure plate as any dog dish flywheel. Right?
Forum: performance & suspension 02-25-2014, 02:11 AM
Replies: 26
Views: 1,020
Posted By OttoB
Only got 15 years experience of measuring and ...

Only got 15 years experience of measuring and analyzing signals, so I guess straight 12 volt will not work. It is measuring frequency, ad LH is counting rising edges or something similar.




...
Forum: performance & suspension 02-24-2014, 03:03 PM
Replies: 26
Views: 1,020
Posted By OttoB
Lh needs 0-12 V Dc square wave signal, 50 % duty...

Lh needs 0-12 V Dc square wave signal, 50 % duty cycle, 12 impulses per wheel revolution for vss.
If you got plans to fly with 250 wild horses in 122, rear axle from 240 is a good idea. Stronger...
Forum: maintenance & nonperformance 02-19-2014, 02:37 AM
Replies: 32
Views: 1,177
Posted By OttoB
thanks, big money spent on volvo parts. I hate...

thanks, big money spent on volvo parts. I hate oil leaks.
Forum: maintenance & nonperformance 02-17-2014, 12:14 PM
Replies: 32
Views: 1,177
Posted By OttoB
I'm almost have fully started fixing my oil...

I'm almost have fully started fixing my oil leaks. 940 leaks brown and red liquid.

Does anybody have more volvo parts numbers? I have to drop transmission when replacing crank seal, so I like to...
Forum: performance & suspension 01-29-2014, 02:24 PM
Replies: 38
Views: 1,810
Posted By OttoB
Or 240 with 5 or 6?

Or 240 with 5 or 6?
Forum: performance & suspension 01-09-2014, 03:01 AM
Replies: 12
Views: 762
Posted By OttoB
Hello kaak, This finnish guy build 960 with...

Hello kaak,

This finnish guy build 960 with D5, Aw is controlled with Suprastick.

http://www.vrcf.fi/foorumi/index.php?topic=22564.0
Showing results 1 to 50 of 300

 
Forum Jump

All times are GMT -4. The time now is 04:44 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2015, vBulletin Solutions, Inc.