home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Search Forums

Showing results 1 to 50 of 66
Search took 0.01 seconds.
Search: Posts Made By: Estateman
Forum: maintenance & nonperformance 10-16-2020, 03:16 PM
Replies: 8
Views: 424
Posted By Estateman
If you don’t feel any harshness or grinding in...

If you don’t feel any harshness or grinding in the trans I would just run it till it dies and then you can put an M46 in ;-) and I’m sure there will always be a steady supply of used AW70s to throw...
Forum: maintenance & nonperformance 10-16-2020, 01:43 PM
Replies: 8
Views: 424
Posted By Estateman
Those were some pretty nasty shavings in the pan....

Those were some pretty nasty shavings in the pan. Did you check how much fluid you drained from the trans to see if you’d lost a considerable amount? Additionally you should try to use a counter hold...
Forum: maintenance & nonperformance 10-06-2020, 07:02 PM
Replies: 4
Views: 404
Posted By Estateman
I’ve heard tales of people endlessly...

I’ve heard tales of people endlessly troubleshooting Chrysler ignition before finally switching to EZK and immediately resolving some of the poor or non-running conditions. Plus the brand new Dave...
Forum: projects & restorations 09-26-2020, 05:46 PM
Replies: 172
Views: 107,109
Posted By Estateman
You can still order some of the seal drivers for...

You can still order some of the seal drivers for these for relatively cheap if you can find em. If not you can always PM me and I can rent one out to you. Iíve got the installer for every oil seal on...
Forum: maintenance & nonperformance 09-21-2020, 07:22 PM
Replies: 7
Views: 1,838
Posted By Estateman
Those Dave Barton harnesses are heavy duty and...

Those Dave Barton harnesses are heavy duty and real nice quality. I got the M46 harness when I manual swapped my car and it was almost comical how easily it all went in and the instructions were...
Forum: maintenance & nonperformance 09-16-2020, 04:23 PM
Replies: 10
Views: 1,147
Posted By Estateman
Definitely need some rags to keep the coolant off...

Definitely need some rags to keep the coolant off your carpet. On my 88 with the older style valve the plastic casing above the heater valve is what seems to be interfering with the hose. I'll try to...
Forum: maintenance & nonperformance 09-16-2020, 03:44 PM
Replies: 10
Views: 1,147
Posted By Estateman
I just replaced my heater ports and your video...

I just replaced my heater ports and your video definitely made it look like a cakewalk. My hoses were glued on from both ends and needed some careful prying with hose removal picks to get free from...
Forum: maintenance & nonperformance 08-20-2020, 12:17 AM
Replies: 52
Views: 3,634
Posted By Estateman
Lol, is there really an issue with these? I think...

Lol, is there really an issue with these? I think the next time weíll try to use the OG Sachs disc just for posterity.

TB and these old Volvoís are truly an exercise self-punishment.
Forum: maintenance & nonperformance 08-20-2020, 12:10 AM
Replies: 52
Views: 3,634
Posted By Estateman
I actually used the HF trans jack and was able to...

I actually used the HF trans jack and was able to get it up in there by myself within an hour or two using pure brute strength to jam it in there. In true TB formula I put in a used PP and clutch...
Forum: maintenance & nonperformance 08-20-2020, 12:08 AM
Replies: 52
Views: 3,634
Posted By Estateman
That may be how it goes for us. Gotta use that TB...

That may be how it goes for us. Gotta use that TB ingenuity.
Forum: maintenance & nonperformance 08-19-2020, 07:56 PM
Replies: 52
Views: 3,634
Posted By Estateman
What a $hitshow. Iím guessing this thing will...

What a $hitshow. Iím guessing this thing will have to come down once more to truly make sure weíre all straight and tidy inside. We referenced the correct markings for ďgearbox sideď towards the...
Forum: maintenance & nonperformance 08-19-2020, 11:36 AM
Replies: 52
Views: 3,634
Posted By Estateman
I was concerned the trans wasn't straight but we...

I was concerned the trans wasn't straight but we used a jack on the rear of the trans to maneuver it every which way, up and down, left to right and it wouldn't slide the last 1/4" to smoothly mate...
Forum: maintenance & nonperformance 08-18-2020, 07:21 PM
Replies: 10
Views: 1,147
Posted By Estateman
Excellent video as always, top notch filming and...

Excellent video as always, top notch filming and description of removal, installation, and problems faced. A truly great addition to the knowledge base on this great car, thanks Alex.
Forum: maintenance & nonperformance 08-18-2020, 07:02 PM
Replies: 52
Views: 3,634
Posted By Estateman
Hereís the full story, sorry Golddayton. We...

Hereís the full story, sorry Golddayton. We dropped the trans again and must I say we did it in under 2 hours which is a new record for me. We found that the clutch disk was backwards but strangely...
Forum: maintenance & nonperformance 08-17-2020, 12:29 AM
Replies: 52
Views: 3,634
Posted By Estateman
Based on change points the pilot bearing may...

Based on change points the pilot bearing may still be good but we will change it anyway just to be safe. I rented the oreilly tool when I did mine and it worked perfectly. Most likely the clutch disk...
Forum: maintenance & nonperformance 08-15-2020, 12:04 AM
Replies: 23
Views: 1,630
Posted By Estateman
Yes sir, as easy as they come. Finally ended up...

Yes sir, as easy as they come. Finally ended up getting a semi truck place to resurface it. Took about 20 minutes and came out as clean as could be expected.
Forum: maintenance & nonperformance 08-14-2020, 08:12 PM
Replies: 23
Views: 1,630
Posted By Estateman
You'd be surprised. The other day in Fort Worth...

You'd be surprised. The other day in Fort Worth we had to call about 5 different shops before one agreed to do it.
Forum: maintenance & nonperformance 08-08-2020, 06:13 PM
Replies: 52
Views: 3,634
Posted By Estateman
How do you reckon that? It isnít tapered is it?...

How do you reckon that? It isnít tapered is it? If itís the same ID on both sides it would be easy to simply flip it over and install. Again, I had a small gap on the bellhousing after stabbing the...
Forum: maintenance & nonperformance 08-08-2020, 04:01 PM
Replies: 52
Views: 3,634
Posted By Estateman
Uh oh, I think it was installed backwards then....

Uh oh, I think it was installed backwards then. There was a gap of maybe less than a 1/4Ē at the bellhousing when we stabbed it in but it went away when tightening down the bellhousing bolts. Iím...
Forum: maintenance & nonperformance 08-08-2020, 11:57 AM
Replies: 52
Views: 3,634
Posted By Estateman
Clutch disk was put in correctly as matched with...

Clutch disk was put in correctly as matched with clutch disk that came out. The orientation of the throw out bearing is something that we were concerned about. Does anyone have any pictures for the...
Forum: maintenance & nonperformance 07-31-2020, 03:26 PM
Replies: 34
Views: 3,424
Posted By Estateman
Paging Philski, I’m pretty sure he’s recapped a...

Paging Philski, I’m pretty sure he’s recapped a few of the VDO clocks and may have some information on that.
Forum: maintenance & nonperformance 07-28-2020, 08:25 PM
Replies: 14
Views: 1,731
Posted By Estateman
+1. It took an offset box end wrench hit on the...

+1. It took an offset box end wrench hit on the end with a rubber mallet to get the bolts loose. Usually once I could break them past tight they almost spun themselves out.
Forum: maintenance & nonperformance 07-27-2020, 08:01 PM
Replies: 1
Views: 997
Posted By Estateman
Definitely wanna get a loop of wire to bypass the...

Definitely wanna get a loop of wire to bypass the neutral safety switch.
Forum: maintenance & nonperformance 07-21-2020, 09:41 AM
Replies: 32
Views: 4,891
Posted By Estateman
Those cabinets are awesome. Wish I could get my...

Those cabinets are awesome. Wish I could get my hands on one.
Forum: projects & restorations 07-20-2020, 02:05 PM
Replies: 95
Views: 35,707
Posted By Estateman
Is envirosafe made to be compatible with R12 or...

Is envirosafe made to be compatible with R12 or R134 systems? What's the molecule size compared to traditional refrigerants? I completely agree on being able to vent it freely though, always a pain...
Forum: projects & restorations 07-20-2020, 01:25 PM
Replies: 95
Views: 35,707
Posted By Estateman
Lots of excellent ideas here. I need to connect...

Lots of excellent ideas here. I need to connect you with a local Dallasite who converted to R134 with the sanden compressor and reused his original condenser after stripping it with an industrial AC...
Forum: maintenance & nonperformance 07-20-2020, 12:45 PM
Replies: 32
Views: 4,891
Posted By Estateman
9995086 is the drift for the torque rod bushings...

9995086 is the drift for the torque rod bushings on a 240. Might be used for other cars too but I know that from my compilation of 200 series specialty tools.
Forum: projects & restorations 07-19-2020, 11:30 PM
Replies: 95
Views: 35,707
Posted By Estateman
Constantly raising the bar and doing so...

Constantly raising the bar and doing so effortlessly. I need to come over and we can do the same thing to mine ;-)
Forum: maintenance & nonperformance 07-18-2020, 12:55 PM
Replies: 32
Views: 4,891
Posted By Estateman
Is that why they come with those little hanger...

Is that why they come with those little hanger things? I swear almost all of the tools I have came with this little metal hanger that looks like you could attach it to a shelf or wire rack to...
Forum: maintenance & nonperformance 07-17-2020, 11:10 AM
Replies: 32
Views: 4,891
Posted By Estateman
Recently acquired an old Baum catalog from a...

Recently acquired an old Baum catalog from a retiring Volvo mechanic and it actually lists a good deal of the parts used on the 240 series and maybe even later. I will try to get some scans or...
Forum: maintenance & nonperformance 07-07-2020, 05:59 PM
Replies: 5
Views: 1,477
Posted By Estateman
If you have an B230F you really want VDO 360-028...

If you have an B230F you really want VDO 360-028 which is a M14x1.50 thread oil pressure sender, and if my TB research should serve me right, it will thread right into the block, no janky brass...
Forum: projects & restorations 07-06-2020, 03:55 PM
Replies: 95
Views: 35,707
Posted By Estateman
Really elegant looking solution. I need to do...

Really elegant looking solution. I need to do something similar but on the windowsill of my wagon. I’m used to having a thicker width door card which is where I generally rest my elbow so something...
Forum: projects & restorations 07-01-2020, 08:45 PM
Replies: 50
Views: 14,032
Posted By Estateman
Which years did the steel cover come on? I...

Which years did the steel cover come on? I ordered a rubber looking diff gasket genuine Volvo.
Forum: maintenance & nonperformance 06-25-2020, 02:20 PM
Replies: 29
Views: 4,302
Posted By Estateman
I agree with John, on my 2000 Civic that has...

I agree with John, on my 2000 Civic that has Thule bars of the same size ratio I’ve hit my head several times in the past 10 years but on the Volvo with 1A towers and the 58” bars I can easily slide...
Forum: maintenance & nonperformance 06-23-2020, 10:04 PM
Replies: 29
Views: 4,302
Posted By Estateman
Yeah, it strangely worked out that I ended up...

Yeah, it strangely worked out that I ended up with 2 sets of the 1A racks and then I searched for the damn basketcase for a few months and finally found one for a decent price. Then not a month later...
Forum: maintenance & nonperformance 06-23-2020, 08:31 PM
Replies: 29
Views: 4,302
Posted By Estateman
+1 for Yakima 1A towers. They will take roundbars...

+1 for Yakima 1A towers. They will take roundbars of the 58” variety on a 240. Found mine on Craigslist for $100 but it may be more or less depending on where you are. I fit 4 bars(4 pairs of towers)...
Forum: projects & restorations 06-14-2020, 12:55 PM
Replies: 122
Views: 27,721
Posted By Estateman
Devils Grave Yard 145 related to the dusty clay...

Devils Grave Yard 145 related to the dusty clay grave it was so closely saved from.
Forum: maintenance & nonperformance 06-03-2020, 06:33 PM
Replies: 88
Views: 33,410
Posted By Estateman
Dave is there really a harshness associated with...

Dave is there really a harshness associated with the solid plates? Iíve heard many say that it wasnít much more than was already present, not to mention if you go with the 15A plates you are adding a...
Forum: maintenance & nonperformance 05-22-2020, 11:22 PM
Replies: 18
Views: 1,967
Posted By Estateman
Sounds like a good build. I’ll have to ask my...

Sounds like a good build. I’ll have to ask my friend again because he had done some extensive research especially on the parallel flow condensers and I thought I recalled him saying something about...
Forum: maintenance & nonperformance 05-18-2020, 04:43 PM
Replies: 18
Views: 1,967
Posted By Estateman
A friend bought and installed this sanden...

A friend bought and installed this sanden compressor (http://store.sanden.com/index.php/4434.html). He had to slightly enlarge some of the mounting hardware to clear the power wiring but other than...
Forum: projects & restorations 05-10-2020, 04:06 PM
Replies: 122
Views: 27,721
Posted By Estateman
Incredible progress, looks even better in person...

Incredible progress, looks even better in person than on here. Now that it’s running and driving you’re light years ahead of the rest of TB still on jack stands waiting for the crusher to call. I...
Forum: projects & restorations 05-10-2020, 04:03 PM
Replies: 95
Views: 35,707
Posted By Estateman
AW71? What happened to the one in there now?

AW71? What happened to the one in there now?
Forum: maintenance & nonperformance 05-01-2020, 06:44 PM
Replies: 6
Views: 1,181
Posted By Estateman
OP was going down this exact road a few days ago....

OP was going down this exact road a few days ago. I desperately searched for lemforder everywhere but couldnít hardly find anything. I ended up going with Meyle after the suggestion of another forum...
Forum: maintenance & nonperformance 04-25-2020, 11:33 PM
Replies: 16
Views: 3,049
Posted By Estateman
Well today I replaced the FPR with a brand new...

Well today I replaced the FPR with a brand new bosch 2.5 bar of the same PN that I pulled out. The car still had trouble starting so I looked at my vacuum hoses and saw that the hose that should be...
Forum: maintenance & nonperformance 04-22-2020, 10:16 AM
Replies: 37
Views: 4,049
Posted By Estateman
Similar to Art I’ve had good luck using even a 12...

Similar to Art I’ve had good luck using even a 12 pt box end wrench and pounding it with a rubber mallet to break loose some very stuck flywheel bolts. The key is to keep the connection of your...
Forum: maintenance & nonperformance 04-18-2020, 02:13 PM
Replies: 16
Views: 3,049
Posted By Estateman
That was actually one of the things I was going...

That was actually one of the things I was going to check next. I replaced the throttle body gasket and found it was kind of wet(?). Didn't smell like gas but definitely was less viscous than oil. I...
Forum: maintenance & nonperformance 04-18-2020, 11:52 AM
Replies: 16
Views: 3,049
Posted By Estateman
I know Iím reviving this very old post but Iíve...

I know Iím reviving this very old post but Iíve started to troubleshoot this again. Lately itís been giving trouble starting where I have to give it gas to stop it from stalling out and then after a...
Forum: projects & restorations 03-12-2020, 03:04 PM
Replies: 20
Views: 8,722
Posted By Estateman
Love this thread. Excellent conversion to Tic and...

Love this thread. Excellent conversion to Tic and lovely pictures.
Forum: projects & restorations 02-25-2020, 02:52 PM
Replies: 6
Views: 2,892
Posted By Estateman
Too damn clean, looking like it could be a nice...

Too damn clean, looking like it could be a nice DD with some basic refreshing and maintenance.
Forum: projects & restorations 02-04-2020, 04:08 PM
Replies: 133
Views: 43,741
Posted By Estateman
Very sweet whip. I love the color and B23 + M46...

Very sweet whip. I love the color and B23 + M46 combo as well. The amount of pics is perfect, canít wait to see what else happens!
Showing results 1 to 50 of 66

 
Forum Jump

All times are GMT -4. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.