Turbobricks Forums - View Single Post

Karl Buchka · 03-23-2012, 11:32 AM

You can either read the sinusoid directly from the sensor or you can tap pin 7 of the LM2903 in the EZK for a square wave output.

03-23-2012, 11:32 AM	#12
Karl Buchka Never go full retard. Join Date: Mar 2007 Location: Göteborg, Sweden	You can either read the sinusoid directly from the sensor or you can tap pin 7 of the LM2903 in the EZK for a square wave output. __________________ Fake Race Car / Fake Street Car / LH2.4 Wasted Spark