View Single Post
Old 06-06-2015, 09:34 PM   #64
lookforjoe
Making Volvo Parts Fit
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Parts gathering for LH2.4 conversion.

951 ECU (6842115)



EZK boxes with chips - in all the boxes I looked at, it was only the older ones with phillips-head screws in the end cover that had the chip. All the torx-head screw versions had no chip.

146 ECU (3517402)



60-2 pulse wheel - manual calls for 1mm +/-.5mm offset from wheel.






Ostrich2.0



3547847 sensor & modified white block cps bracket - still have to make an adaptor plate to mount it to the motor.



Will need to do some wiring. Have to figure out how to deal with the speed signal. Need to get a late 240/740 instrument cluster & remove the circuit board that outputs the signal to pin 34
__________________

My XR July2013 - 446AWHP @ 8K rpm Feedback Thread

Last edited by lookforjoe; 06-02-2018 at 08:18 PM..
lookforjoe is offline   Reply With Quote