• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

B20 fuel ine routing (pump to carb)

NONHOG

NONHOG

equal opportunity car guy
Joined
Oct 3, 2008
Location
Tucson ish
Looking at the fuel pump the line runs very close to the block then up near the valve cover over to carb. (Webber 32/36)
Thinking about keeping fuel as cool as possible. Does have hot soak issues.
I have a heat shield under carb already.
Love to see others routings or suggestions.

Thanks in advance!
 
140s (or mine at least) had a little bracket that bolts to the thermostat housing so the fuel line is held behind the fan. But I wouldn’t guess heat soak in the line would cause any real issue.
 
As it sits
 

Attachments

  • IMG_20180608_110620992.jpg
    IMG_20180608_110620992.jpg
    193.3 KB · Views: 23
  • IMG_20180608_110606828_LL.jpg
    IMG_20180608_110606828_LL.jpg
    199 KB · Views: 23
You must log in or register to reply here.
Back
Top