chronicrhythm
Member
- Joined
- Sep 28, 2012
- Location
- Colebrook, CT
I have an m46 that when I bought it, it didn't have a bellhousing on it and it was missing the bearing that sat behind the bellhousing. It is the one that sits below the main input shaft. Looking on rockauto it looks like the countershaft bearing is what I need but I haven't been able to find anything online about it and my haynes manuals don't mention the countershaft bearing from what I've read. The bearing sits on the circle cutout of the right bellhousing in the picture. There is also a rear and center countershaft bearing. Would the one I need be the center?