240 Seat Belt Bolt Size

89 244

Post t5wc swap. 3-ish inch driveshaft meant that the shop that did the swap took out my passenger side seat belt bolt. I'm just looking to figure out the size. I'd uninstall my driver's side bolt to figure it out, but I'm not permitted to use tools without persecution.

Seat belt hardware needs 'merican tools. 7/16-20 UNF using a 5/8" wrench on the bolts. Some have special shoulders for belt attachment. I use a 16 metric wrench because I have one.

^

You forgot the grade 8 part.

Thanks Art, Found out it didn't largely matter since the shop that did my trans swap cut out the anchor nut completely... had to run a bolt up from the exterior and reattach it that way. Ah well. Thanks again!