• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Volvo 760 `88 V6 turbo

Beovoxo

New member
Joined
Jun 24, 2016
Location
Denmark
Hi all :)
My car
Volvo 760 ?88
3" complete exhaust from turbo to the end ;)
all exhaust parts from mid car to front power wrapped. and some heat shielded.
Turbo heatshielded and oil pressure and returne lines sleved in silicon / glassfiber tubes.
external waste gate turbosmart ultra 38mm fittet as recurculation
turbo smart fpr 3000 fuel pressure regulator
3" intake pipe with pipercross foam filter
typen 044 fuel mid pump
GSS342 intank fuel pump
Volvo 850 idle valve and throttle pot. meter.
innovate MTX-l wide band kit
Boost gauge
Fuel pressure gauge "oil pressure gauge mod"
New orings on and gaskets on intake and valve covers.
Orange Injectors from volvo 850.
Removed pressure compensator on fuel line.
new hoses on the motorblock in the "V" under the intake manifold.
Transmission mod "spacers in the valves"
Poly bushes in the rear differental.
limited slip differental from another car.
New yellow KONI gas shocks fore a 940 with costum made brackets fore the multilink
New brakes all arround the car.
New berake lines and handbrake caples.
New transmission oil and fushed several times.
New engine oil and filter
T3 / T4 Turbo
Oil pressure line.
diyautotune Megasquirt 3x
diyautotune air temp. sensor
diyautotune coolent sensor
An fittings fuel lines xxxx
Green diodes in the mid consol with resistors

and alot more !! :)


24q027r.jpg

30katmt.jpg

r09q51.jpg

2dcifqu.jpg


2vb1jr5.jpg

ivy7sx.jpg

2m4ul42.jpg

22zwaw.jpg

15x97cx.jpg

wim25j.jpg


more pic wil be postet later :)
 
its only set up to 0.8 Bar right now becurse it is not fully mapped but there is a boost pressure solonid so its just a mouse click away :)
 
Back
Top