Devsbeater
Active member
- Joined
- Oct 27, 2008
- Location
- Kelowna BC, Canada
Anybody try a j-pipe for mounting a turbo on a 16v n/a exhaust manifold on a 240?
I'm concerned about downpipe clearance between firewall and manifold.
And clearence between the manifold and crossmember for the turn in the j-pipe itself.
Is this concidered "too" hokey.
I'm concerned about downpipe clearance between firewall and manifold.
And clearence between the manifold and crossmember for the turn in the j-pipe itself.
Is this concidered "too" hokey.