JuhaP
New member
- Joined
- Nov 13, 2002
- Location
- Finland, Yurup
Here's few pictures of my B20 turbo project. As you can see, there's VERY little space available on Amazon .
Specs:
-------
B20 '75 block. Mahle forged pistons (7:1 compression ratio). Polished and weight-adjusted M-rods. B230 oil pump, shimmed 2mm, oil tray lowered 30mm, turbo oil lines added, remote filter.
Steel timing gears. "Mean" custom grind cam. Head heavily ported, 46/38,5mm steel valves, double valve springs. 0,8mm copper gasket.
Homemade exhaust manifold with 48mm tubing, external Pate Racing wastegate. Modified Mitsu TD04HL-16T (850R) turbo (CBV removed, wastegate removed). Dump valve. DHLA40 Dellorto carbs with homemade pressure box. Misab short intake. Aluminum intercooler. MSD6AL ignition.
Lightened flywheel. 240 turbo pressure plate. 4-wing sinter disc. Not sure about the transmission yet, probably M45.
Hopefully ready early next summer...
Specs:
-------
B20 '75 block. Mahle forged pistons (7:1 compression ratio). Polished and weight-adjusted M-rods. B230 oil pump, shimmed 2mm, oil tray lowered 30mm, turbo oil lines added, remote filter.
Steel timing gears. "Mean" custom grind cam. Head heavily ported, 46/38,5mm steel valves, double valve springs. 0,8mm copper gasket.
Homemade exhaust manifold with 48mm tubing, external Pate Racing wastegate. Modified Mitsu TD04HL-16T (850R) turbo (CBV removed, wastegate removed). Dump valve. DHLA40 Dellorto carbs with homemade pressure box. Misab short intake. Aluminum intercooler. MSD6AL ignition.
Lightened flywheel. 240 turbo pressure plate. 4-wing sinter disc. Not sure about the transmission yet, probably M45.
Hopefully ready early next summer...