soclosenotnear
Active member
- Joined
- Oct 12, 2011
- Location
- summerville, south carolina
Realy nice car you got here! Very nice thread with a lot of pictures!
Agreed. I've been clicking every day with interest. Cool car Uncleknucklez.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Realy nice car you got here! Very nice thread with a lot of pictures!
Does that area of the rubber elbow rub on one of the brake lines at the master cyl?
There is a radiator hose from a class 8 truck that is a perfect fit. Ask Eric Mollerstuen for the P/N.
Great thread / can't wait to see it.
It doesn't touch at idle, I'm assuming it wouldn't touch otherwise, but who knows what is going on in there when I'm mashing it.
It doesn't touch at idle, I'm assuming it wouldn't touch otherwise, but who knows what is going on in there when I'm mashing it.
On my car it got the brake line to leak. I had to replace it
I see yours is already bent to the driver side (front line)
ps get another elbow at jy and just go the whole way at 18... did over 100k miles at 18psi and few times well above that and never had a hose fail
Interesting. I guess I?ve got different a different master cylinder. Mine has a hard line exiting directly into that rubber elbow and there is always interference between the two. I haven?t had any issues, but was just curious.
car is frustratingly nice.
Nice work with the bracket.
For future reference, do you have a link to the WGA you bought?
Nice Chris! That bracket design really does work nicely doesn't it. Absolutely no flex at all, simple, and relatively easy to fab.