wennstroma
Active member
- Joined
- Apr 25, 2006
- Location
- Idaho
I have an early one, and the fuel rail mounts are attached at two points on the base plate of the plenum at 90? to yours. Its very solid.
Just having it attached at one point in that direction would bend those angle aluminum pieces with fuel pressure, boost pressure, and any preload that might be on the injectors. I thought I saw someone else's fail the same way yours did too.
Maybe it would be enough if you add an extra piece on the bottom open part of the angle aluminum piece so its boxed in like the early ones.
Just having it attached at one point in that direction would bend those angle aluminum pieces with fuel pressure, boost pressure, and any preload that might be on the injectors. I thought I saw someone else's fail the same way yours did too.
Maybe it would be enough if you add an extra piece on the bottom open part of the angle aluminum piece so its boxed in like the early ones.