View Single Post
Old 05-01-2014, 05:14 PM   #12
cwdodson88
Board Member
 
Join Date: Oct 2011
Location: The Dalles, Oregon
Default

So MS is assembled and bench tested for ignition. Set my rev limit up for 5k just to see if it works. Harness is assembled and in but not wired to any sensors or injectors. Just running my coil power and trigger to the dizzy and the grounds. Then it should fire on Saturday!
[IMG] by cwdodson88, on Flickr[/IMG] MS box all done up!

[IMG]Untitled by cwdodson88, on Flickr[/IMG] and in the dash...

Last edited by cwdodson88; 05-02-2014 at 10:44 AM.. Reason: bigger pics
cwdodson88 is offline   Reply With Quote