Thread: Clutch slip
View Single Post
Old 11-29-2018, 04:27 AM   #1
Board Member
Join Date: May 2012
Location: Glasgow, UK
Default Clutch slip

I recently fitted a 3.0 motor to a manual 2.5 960, went with a solid light weight flywheel and an 850r clutch, I explained to the garage doing the swap that the clutch arm would need spaced out due to the difference thickness of the flywheel which they seemed to understand. Car drives well, changing gear with no issues however when maneuvering the car a low speeds, particularly in reverse I can smell the clutch slipping, are they likely to have spaced the pivot point out too much or too little? Thanks
monty400k is offline   Reply With Quote