Dadssleeper
New member
- Joined
- Sep 12, 2016
- Location
- Maine
I am getting this now ...I just saw the light at the end of the tunnel!
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I am getting this now ...I just saw the light at the end of the tunnel!
nice Progress!!!
Called a PTC resistor. Will set check engine. Will run fine without it. Side bar: i used an LH 2.4 harness out of a 240. It makes things a whole hell of a lot easier, especially if your drunk doing the harness.
I found out that its an air temperature sensor.
Called a PTC resistor. Will set check engine.
I just got to thinking then, I don't want the cold start injector if the 740's computers will compensate.
Wont set CEL. Just a heater for the PCV system. Sidenote- I still see those exact same parts on mid 2000's VW's.
Don't worry about it.
Don't need cold start. Just leave it unplugged. Also WONT set CEL.
what cam u running?
harald is selling the sandwich plate and cooler for cheap IDK where u live http://forums.turbobricks.com/showthread.php?t=328010Right now all I have is the stock turbo cam from the 92 740. I was thinking about getting an A cam later down the road (still need to research this a bit more). But at this point my wife is wondering if I will ever stop smashing my pink piggy.
I still need Injectors, top end gasket kit, oem heater core hoses, rebuild the turbo. I assume that I will also have to get some turbo pipes and plumbing parts, sandwich plate adapter and an oil cooler.
I told my wife it will be about 800.00 more to finish this I went a bit high because she won't complain a bit if I stay under....lol
harald is selling the sandwich plate and cooler for cheap IDK where u live http://forums.turbobricks.com/showthread.php?t=328010
I gave ya the link for injectors. turbo pipes are best found at local junk yards.
Make sure to mark the blade and housing before you rebuild the turbo unless you plan on having it rebalanced. (which I recommend)